IDEMAG RPR Magnetic Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 826-4261
  • Fabrikantnummer 116013
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM IDEMAG RPR Non Contact Safety Switch

The IDEMAG RPR safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.
It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.
When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1.

Features and Benefits

Magnetic high-power switching
Dual channel safety outputs
Plastic high specification polyester housing
High temperature stability up to 80°C
High tolerance to guard misalignment
Resistant to many organic and inorganic chemicals
IP69K protection
Resistant to high temperature hosing and detergent wash down
Conformance to EN60947-5-3 PDF-S
Up to PLe ISO 13849-1
Cylindrical fitting suitable for all industry applications
Easy to install M30 threaded body - easy to set
10 mm wide sensing
Switching capacity 0.5 A

Applications

The IDEMAG RPR Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries.

Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.

Approvals

CE, cULus, TUV.

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material Plastic
Auxiliary Contacts NO
Connection Type 2m cable
Switch Type Cylindrical
Range IDEMAG
Terminal Type Pre-Wired
Series RPR
Switching Distance 10 (Close) mm, 20 (Open) mm
IP Rating IP67, IP69K
Supply Current 500 mA
Actuator Included Yes
Dimensions 30 (Dia.) x 15 (Actuator) mm
Length 15 (Actuator) mm, 60 (Switch) mm
Actuator Type Magnetic
Number of Approach Directions 2
Sensor Principle Magnetic
Housing Colour Red
Width 30 (Actuator) mm, 30 (Switch) mm
Safety Category 4
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
91,39
(excl. BTW)
110,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 91,39
Related Products
The Ferrogard FRS 1, 2, 20 and 21 ...
Description:
The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from ...
The Ferrogard FRS 6, 9 and 10 are ...
Description:
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.