IDEMAG SPR Magnetic Safety Switch, Plastic, 250 V ac

  • RS-stocknr. 826-4283
  • Fabrikantnummer 111015
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM IDEMAG SPR Non Contact Safety Switch

The IDEMAG SPR safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.
It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.
When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1.

Features and Benefits

Magnetic high-power switching
Dual channel safety outputs
Plastic high specification polyester housing
High temperature stability up to 80°C
High tolerance to guard misalignment
Resistant to many organic and inorganic chemicals
IP69K protection
Resistant to high temperature hosing and detergent wash down
Conformance to EN60947-5-3 PDF-S
Up to PLe ISO 13849-1
Universal fitting suitable for most general industry applications
12 mm wide sensing
Switching capacity 1 A
22 mm fixing centres

Applications

The IDEMAG SPR Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries.

Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.

Approvals

CE, cULus, TUV.

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 250 V ac
Safety Contacts 2NC
Housing Material Plastic
Auxiliary Contacts NO
Connection Type M12
Switch Type Rectangular
Range IDEMAG
Terminal Type 8-Pin M12 Connector
Series SPR
Switching Distance 10 (Close) mm, 22 (Open) mm
IP Rating IP67
Supply Current 1 (Safety Channels) A, 200 (Auxiliary Channel) mA
Actuator Included Yes
Width 25.5 (Actuator) mm, 25.5 (Switch) mm
Dimensions 50 x 25.5 x 13 (Actuator) mm, 50 x 25.5 x 13 (Switch) mm
Safety Category 4
Length 50 (Actuator) mm, 50 (Switch) mm
Housing Colour Red
Sensor Principle Magnetic
Number of Approach Directions 2
Actuator Type Magnetic
Depth 13 (Actuator) mm, 13 (Switch) mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
97,96
(excl. BTW)
118,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 97,96
Related Products
The Sipha S1 is a non-contact switch in ...
Description:
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...
The Ferrogard FRS 13 and 14 are magnetically ...
Description:
The Ferrogard FRS 13 and 14 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch ...
Mounting dimensions identical to best-selling AZ163 cable entries ...
Description:
Mounting dimensions identical to best-selling AZ163 cable entries M20 x 1.5IP67 protectionControl category up to 4 to EN954-1Suitable for food processing industryDimensions: L39 x W52 x H90 mm.