- RS-stocknr.:
- 880-1826
- Fabrikantnummer:
- RSS260-D-ST
- Fabrikant:
- Schmersal
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-09-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 157,84
(excl. BTW)
€ 190,99
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 157,84 |
Alternatieven
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor mogelijke alternatieven.
- RS-stocknr.:
- 880-1826
- Fabrikantnummer:
- RSS260-D-ST
- Fabrikant:
- Schmersal
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Schmersal RFID Non-Contact Safety Switch, M8, 600mA - RSS 260 Series - RSS260-D-ST
Use this non-contact safety switch from Schmersal to improve workplace safety in industrial environments. It has a coded actuator and uses radio frequency identification (RFID) technology to prevent tampering with the switch. It triggers an alarm when swivel doors are opened during operation, alerting you to a potential hazard.
This component can be connected with up to 31 sensors in series for easy diagnosis via a programmable logic controller (PLC), so you can monitor and configure multiple switches at the same time. It has a thermoplastic housing that offers excellent durability and corrosion resistance, making it suitable for use in demanding industrial environments.
This component can be connected with up to 31 sensors in series for easy diagnosis via a programmable logic controller (PLC), so you can monitor and configure multiple switches at the same time. It has a thermoplastic housing that offers excellent durability and corrosion resistance, making it suitable for use in demanding industrial environments.
Features & Benefits
• IP67 (ingress protection) rating indicates the unit can withstand dust and immersion in up to 1m of water for 30 minutes
• Meets IEC/EN 60947-5-3 (International Electrotechnical Commission/European Norm) electrical safety standards
• Surge voltage capacity of 0.8kV to efficiently handle voltage spikes
• Broad operating temperature range of -25°C to +65°C for use in harsh environments
• Meets IEC/EN 60947-5-3 (International Electrotechnical Commission/European Norm) electrical safety standards
• Surge voltage capacity of 0.8kV to efficiently handle voltage spikes
• Broad operating temperature range of -25°C to +65°C for use in harsh environments
Applications
• Access points to hazardous industrial areas
• Chemical processing plants
• Chemical processing plants
How do I identify the device's switching status?
This safety switch has three light-emitting diode (LED) indicators for easy status identification. Green indicates that there's a supply voltage, red shows an error and yellow means it's sensing.
Specificaties
Kenmerk | Waarde |
---|---|
Supply Voltage | 20.4 → 26.4V dc |
Housing Material | Plastic |
Connection Type | M8 |
Actuator Type | Coded |
Sensor Principle | RFID |
Safety Category | 3 |
Actuator Included | Yes |
Series | RSS 260 |
Switching Distance | 6 (Lateral Sao ON) mm, 9 (Lateral Sn) mm, 10 (Front Sao ON) mm, 12 (Front Sn) mm, 15 (Lateral Sar OFF) mm, 18 (Front Sar OFF) mm |
IP Rating | IP65, IP67 |
Supply Current | 600mA |
Length | 39.2mm |
Standards Met | BG-GS-ET-14, CE Listed, cULus Listed, EN 60079-0, EN 60079-15, EN 60079-31, EN ISO 13849-1, IEC 60947-5-3, TUV |
Width | 29.5mm |
Depth | 18mm |
Number of Approach Directions | 2 |