RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac With RS Calibration

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DK
Productomschrijving

RS Pro Volt Stick Non-Contact Voltage Detector

The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.

Features and Benefits:

• Voltage Range: 230 V ac - 1000 V ac
• Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac
• Power: 2 x AAA batteries (Included)
• Altitude: < 2000 m
• RH: 80% @ 30°C, 50% @ 40°C
• Operating Temperature: -20°C to +40°C
• Over Voltage: CAT III 1000 V
• Weight: 50 gm
• Length: 151 mm
• Diameter: 18 mm
• IEC61010-1 CAT III 1000 V ac

Note

Only use with GP Alkaline GN24A, LR03, Size AAA

What is a non contact voltage tester used for?

• Locating breaks in cables
• Detecting blown fuses inside plugs of fuse holders
• Distinguishing between live and neutral wires in both single and 3 phase supply
• Identifying faulty inline switches
• Checking function of circuit breakers
• Locating defective in-series light bulbs

Note

Only use with GP Alkaline GN24A, LR03, Size AAA

Specificaties
Kenmerk Waarde
Indicator Type Voltage
Battery Type AAA, GP Alkaline GN24A LR03 Size AAA
Calibrated RSCAL
ATEX Approval Yes
Power Source Battery
Safety Category CAT III 1000 V ac
Dimensions 18 (Dia.) x 151mm
Weight 50g
Diameter 18mm
Length 151mm
Maximum Detection Voltage 1000V ac
Maximum Operating Temperature +40°C
Minimum Detection Voltage 230V ac
Safety Category Level CAT III
Safety Category Voltage 1000V ac
Minimum Operating Temperature -20°C
187 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
99,56
(excl. BTW)
120,47
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 99,56
Related Products
The FLIR VP42 is a high-quality non-contact AC ...
Description:
The FLIR VP42 is a high-quality non-contact AC voltage detector (NCV) and flash light that offers high-end features, making it the best value product in its category. The reliable, durable detector includes a bright flash light, a vibration feedback alarm. ...
The NC1 is a non-contact magnetic field tester ...
Description:
The NC1 is a non-contact magnetic field tester for checking the operation of relays and solenoid valves in a wide range of machinery. The NC1 saves time by allowing testing of solenoids without dismantling the equipment or control panel.A bright ...
Optimised for 230V single and 3 phase suppliesAudible ...
Description:
Optimised for 230V single and 3 phase suppliesAudible and visual indication from 200V to 1000V ACExtended probe for easy accessClear tip for high visibility indicationLED torch for use in low lightPower on LED pulse and low battery indicator.
The FLIR VP52-2 is a durable, CAT IV-rated ...
Description:
The FLIR VP52-2 is a durable, CAT IV-rated non-contact voltage detector featuring light, vibration, and beeper feedback alarms and a powerful LED flashlight. Use the VP52-2 to reliably check whether an AC circuit is live before beginning work detect voltage ...