Fluke 2AC Non Contact Voltage Detector, 90V ac to 1000V ac

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 44,44

(excl. BTW)

€ 53,77

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 116 stuk(s) klaar voor verzending
  • 333 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 44,44

*prijsindicatie

Kalibratie-opties

presentation
Fluke 2AC Non Contact Voltage Detector, 90V ac to 1000V ac With RS Calibration
Calibration Type:
RSCAL
RS-stocknr.
810-5302

Per stuk

€ 102,44

(excl. BTW)

€ 123,95

(incl. BTW)

RS-stocknr.:
741-4355
Fabrikantnummer:
FLK2AC/90-1000V
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Indicator Type

Voltage

Battery Type

AAA

Audible Tone

No

Power Source

Battery

Safety Category

CAT IV 1000 V

Weight

45.4g

Maximum Detection Voltage

1000V ac

Minimum Detection Voltage

90V ac

Maximum Operating Temperature

+50°C

Minimum Operating Temperature

-10°C

Model Number p

2AC

Safety Category Voltage

1000V

Safety Category Level

CAT IV

Niet conform

Land van herkomst:
MY

Fluke 2AC VoltALERT Non-Contact Voltage Detector


VoltALERT non-contact voltage tester is the new addition to this series by Fluke. Pocket-sized and easy to use, the 2AC tests for defective grounds and energized circuits. A glowing red tip lights up when in close proximity of where voltage is present, such as a terminal strips, power cords or outlet wires.

Two new features on this instrument allow the user to be always at the ready, using special low power circuitry to sustain battery life the 2AC is always on the go. An innovative battery check button also allows users to ensure the battery is in good condition. Finally a clip design optimises pocket and tool bag storage.

Features and Benefits:


• 200 - 1000V ac Voltage detection
• Battery check button
• Category IV – 1000 V overvoltage rated product for best in class user protection
• Rugged and reliable
• -10°C to 50 °C operating temperature

Frequently asked questions:


What is a non-contact voltage tester used for?
Voltage testers or detectors are used to check the flow of current through a circuit. They can be used to check safety, or to ensure equipment is functioning correctly. They can also test for the current strength, whether the circuit is grounded correctly or to ensure no current is flowing at all so that work can be begin on the circuit.

How do non-contact voltage testers work?
Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage.

Standards

Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01, Pollution Degree 2

Gerelateerde Links