RS PRO, CDU 4 Series , 600 V Din Rail Terminal, Screw Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Spring Loaded Screw Clamp Terminal Blocks

DIN Rail mounted spring loaded screw terminal blocks have a spring under the cable clamp that provides a secure contact even if the terminal is not correctly tightened.

• Suitable for a broad range of cross-section and wire types
• Wires can be connected without any special preparations
• Easy to handle and safe to connect
• Excellent vibration resistance
• High reliability and maintenance free
• Very low contact resistant
• Easy mounting and dismounting from DIN rail

Note

For a suitable end plate, please see RS 878-7540

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Series CDU 4
Wire Size 22 → 8 AWG
Cable CSA 4mm²
Current Rating 32 (IEC) A, 35 (UL/CSA) A
Number of Levels Single
Termination Method Screw
Voltage Rating 600 V
160 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,636
(excl. BTW)
0,77
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 0,636
€ 6,36
*prijsindicatie
Related Products
Spring loaded terminal accommodates two hook bladed crimp ...
Description:
Spring loaded terminal accommodates two hook bladed crimp terminals located in the slot in the current bar behind the screw clamp. The second blade is on the underside of the clamp. • Clamping yoke technology• Screw connection.
ABB series of double deck DIN Rail terminals ...
Description:
ABB series of double deck DIN Rail terminals with four independent screw clamp connections and are suitable for use with a wide range of cable size. • Space saving• Feed-through connection• Flexibility to snap onto symmetrical and asymmetrical DIN Rails. ...
These compact terminals from Phoenix Contact allow for ...
Description:
These compact terminals from Phoenix Contact allow for complex switching tasks in confined spaces. Mounted on TS15 RS 467-349. These terminals have a pitch of just 4.2mm. End clamp is available to purchase separately. • Screw connection• Space saving• Mount ...
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...