3 Pole Enclosed Non Fused Isolator Switch, NO, 63 A, 37 kW, IP65

  • RS-stocknr. 333-518
  • Fabrikantnummer P3-63/V/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Rear of Panel Mounted Switch Disconnectors

Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks.
From Eaton, the P and T range of switch disconnectors provides safe switching, isolating and control. Robust and reliable the high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection.

Features and Benefits

• Compact and durable
• Clear position indication
• Padlockable in the OFF position with up to 3 x 8 mm padlocks
• Rear mounting, easily and quickly fitted on to DIN rail or a base plate
• P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft

Applications

The Eaton P series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are

• Machine control panels
• Isolation of circuit breakers
• Transformers and transmission lines
• Switchgear panels
• Distribution panels
• Consumer units

FAQ

Q: Are there any accessories available?
A: Yes, there are several accessories available for the P series of disconnectors. They include the following
Extended shaft kits
• Part number 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required.
• Part number 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required.
Neutral blocks
• Part number 333-495 for a 3 pole 25A add-on neutral block
• Part number 333-502 for a 3 pole 32A add-on neutral block
• Part number 333-518 for a 3 pole 63A add-on neutral block
Contact Blocks
• Part number 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch

Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 63 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 37 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 1260 A
Length 65mm
Width 48mm
Depth 96mm
Throw Configuration Single
Handle Colour Red
Terminal Type Screw
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
81,95
(excl. BTW)
99,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 81,95
5 - 11
€ 79,44
12 +
€ 76,88
Related Products
TeSys GS fusible disconnect switches ensure load closing ...
Description:
TeSys GS fusible disconnect switches ensure load closing or cut-off, safety isolation and protection against surges for all low voltage electrical circuits.Located at the top of electrical panels, they are specially designed to protect and interrupt main circuits (including the ...
E 90 series fuse-disconnectors are designed for connecting ...
Description:
E 90 series fuse-disconnectors are designed for connecting and disconnecting circuits under load, providing protection against short circuits and overloads. The case is made of self-extinguishing thermoplastic material resistant to high temperatures (all materials are UL listed) while the contact ...
Designed to provide protection against the risk of ...
Description:
Designed to provide protection against the risk of electrocution and fire hazards.Passive circuitry - power is restored immediately after a power failure.Active circuitry - power is only restored after device has been manually reset, thus protecting against equipment suddenly re-energising. ...
Professional range of WEG enclosures and accessories for ...
Description:
Professional range of WEG enclosures and accessories for use with the MPW series of contactors. IP41 and IP66 PVC enclosures. The enclosures are light grey in colour.Accessories include IP55 front plates and various coloured handles. Other accessories include three-phase feeder ...