3 Pole Panel Mount Non Fused Isolator Switch, 25 A, 15 kW, IP20, IP65

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Base Mounting Switch Disconnectors

Suitable for main
690V nominal voltage
Ingress protection IP55
Full compliance with BS/EN 60947-3
"Padlockable off" handle assembly (3 padlocks up to 8mm dia shank)
Supplied with a 3-pole switch body, terminal shroud, extension shaft door interlock and operation assembly (red/yellow emergency switch)
Supplied as complete kit in one pack

Note

The figures quoted for rated operational power within the price table are with respect to a voltage of 230/240V, with figures within brackets ( ) being those with respect to a voltage of 690V.
The higher current rating refers to use in free air, the lower current rating represents use in an enclosure.

Approvals

UL, CSA, GL

//media.rs-online.com/t_line/L433981-01.gif

Schneider Electric Vario Range

Specificaties
Kenmerk Waarde
Number of Poles 3
Range TeSys
Maximum Current 25 A
Mounting Type Panel Mount
Series VARIO
Power Rating 15 kW
IP Rating IP20, IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Length 83mm
Terminal Type Screw
Handle Colour Red
Maximum Operating Temperature +50°C
Minimum Operating Temperature -20°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
36 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
47,70
(excl. BTW)
57,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,70
5 - 9
€ 46,26
10 +
€ 44,75
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
High impact polycarbonate enclosures to IP65Lockable with up ...
Description:
High impact polycarbonate enclosures to IP65Lockable with up to four padlocks in the OFF positionVersions available with N/O early break auxiliary contactsEarth terminal provided, neutral terminal not includedAux. contact not feasible in 3 pole units160A unit fitted with terminal lugs ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat ...