2 Pole Panel Mount Non Fused Isolator Switch, NO, 32 A, 13 kW, IP65

  • RS-stocknr. 257-9435
  • Fabrikantnummer T3-1-102/V/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Rear of Panel Mounted Switch Disconnectors

Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks.
From Eaton, the P and T range of switch disconnectors provides safe switching, isolating and control. Robust and reliable the high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection.

Features and Benefits

• Compact and durable
• Clear position indication
• Padlockable in the OFF position with up to 3 x 8 mm padlocks
• Rear mounting, easily and quickly fitted on to DIN rail or a base plate
• P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft

Applications

The Eaton P series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are

• Machine control panels
• Isolation of circuit breakers
• Transformers and transmission lines
• Switchgear panels
• Distribution panels
• Consumer units

FAQ

Q: Are there any accessories available?
A: Yes, there are several accessories available for the P series of disconnectors. They include the following
Extended shaft kits
• Part number 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required.
• Part number 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required.
Neutral blocks
• Part number 333-495 for a 3 pole 25A add-on neutral block
• Part number 333-502 for a 3 pole 32A add-on neutral block
• Part number 333-518 for a 3 pole 63A add-on neutral block
Contact Blocks
• Part number 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch

Specificaties
Kenmerk Waarde
Number of Poles 2
Maximum Current 32 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 1
Switch Rating 650 A
Length 48mm
Width 48mm
Depth 105mm
Terminal Type Screw
Handle Colour Red
Maximum Operating Temperature +50°C
Minimum Operating Temperature -25°C
Throw Configuration Single
19 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
38,93
(excl. BTW)
47,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 38,93
5 - 11
€ 37,74
12 +
€ 36,52
Related Products
RS Pro high quality range of panel mount ...
Description:
RS Pro high quality range of panel mount switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. All switch ratings at AC22RoHS compliantMaximum panel thickness 3mmDepth behind panel 102min/117max mmDimensions 72(H)x50(W) mmActuator ...
A high quality, durable back of panel mount ...
Description:
A high quality, durable back of panel mount isolator complete with handle and shaft. The switch is back of panel mount, either 35mm din rail or two screw fixing. The handle is interlocked ensuring removal only in the off position, ...
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where ...