3 Pole Enclosed Non Fused Isolator Switch, 25 A, 13 kW, IP65

  • RS-stocknr. 330-7944
  • Fabrikantnummer P1-25/I2/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

The perfect solution for installing as a safety measure Used as an emergency switching off/emergency stop device The basic functions: used as a main switch, maintenance switch or manual override switch Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions Built-in earth commoning block Lockable in the 0/OFF position, with up to three padlocks Totally insulated Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

//media.rs-online.com/t_line/LE330768-01.gif
//media.rs-online.com/t_line/LI330768-01.gif
//media.rs-online.com/t_line/LK330768-01.gif
Specificaties
Kenmerk Waarde
Number of Poles 3
Maximum Current 25 A
Mounting Type Enclosed
Power Rating 13 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 240 V dc, 690 V ac
Electrical Phase 3
Switch Rating 6000 V ac
Length 180mm
Width 100mm
Depth 115mm
Throw Configuration Single
Terminal Type Screw
Handle Colour Red
Minimum Operating Temperature -25°C
Maximum Operating Temperature +40°C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
73 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
36,01
(excl. BTW)
43,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 36,01
5 - 11
€ 34,91
12 +
€ 33,78
Related Products
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
Eaton's isolator switch can sometimes be referred to ...
Description:
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a ...
A range of enclosed switch disconnectors from Eaton ...
Description:
A range of enclosed switch disconnectors from Eaton Moeller. On these switches the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and manual ...