3 + N Pole Enclosed Non Fused Isolator Switch, NO, 20 A, 6.5 kW, IP65

  • RS-stocknr. 330-8111
  • Fabrikantnummer T0-2-8900/I1/SVB
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Specificaties
Kenmerk Waarde
Number of Poles 3 + N
Maximum Current 20 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 6.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 415 V ac
Electrical Phase 3
Switch Rating 320 A
Length 137mm
Width 80mm
Depth 75mm
Maximum Operating Temperature +50°C
Terminal Type Screw
Minimum Operating Temperature -25°C
Handle Colour Red
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
73 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
31,61
(excl. BTW)
38,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 31,61
5 - 11
€ 30,65
12 +
€ 29,67
Related Products
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...
Eaton's isolator switch can sometimes be referred to ...
Description:
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a ...
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where ...
Eaton's isolator switch can sometimes be referred to ...
Description:
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a ...