2 Pole DIN Rail Non Fused Isolator Switch, 2NO, 20 A, IP40

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BG
Productomschrijving

Acti9 iSW Switch Disconnectors

iSW switch-disconnectors for control of opening and closing of circuits under load

Rating: 20 to 125 A
VisiSafe for safe operation and maintenance work on circuit protection
Available options: state indication; sealable terminal shield, rotary handle, padlocking device

Specificaties
Kenmerk Waarde
Number of Poles 2
Maximum Current 20 A
Range Acti 9
Mounting Type DIN Rail
Series iSW
Normal State Configuration 2NO
IP Rating IP40
Voltage Rating 415 V
Auxiliary Contacts Available Yes
Switch Rating 4 kV
Length 18mm
Width 77mm
Depth 70mm
Minimum Operating Temperature -20°C
Terminal Type Tunnel
Maximum Operating Temperature +50°C
Throw Configuration Single
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
150 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 15,55
14,77
(excl. BTW)
17,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 14,77
10 - 14
€ 14,17
15 +
€ 13,55
Related Products
The Eaton 3+N pole flush mount non-fused switch ...
Description:
The Eaton 3+N pole flush mount non-fused switch disconnector is lockable at 0 (OFF) position. It has a switching rating of 320A. Its service temperature ranges between 40°C and 50°C. • 1 and 3 electrical phase• Accepts padlocks• Maximum current ...
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat ...
High impact polycarbonate enclosures to IP65Lockable with up ...
Description:
High impact polycarbonate enclosures to IP65Lockable with up to four padlocks in the OFF positionVersions available with N/O early break auxiliary contactsEarth terminal provided, neutral terminal not includedAux. contact not feasible in 3 pole units160A unit fitted with terminal lugs ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. 3-pin safety switchSealed construction, IP65Cable feed through from above and belowWith auxiliary contact.