HEDS-6140#B09,Code wheel,3ch,1000CPR,1/2

  • RS-stocknr. 178-3264
  • Fabrikantnummer HEDS-6140#B09
  • Fabrikant Broadcom
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Code Wheels

The Avago Technologies code wheels are patterned discs which translate a mechanical position into a representative electrical signal. This range of metal code wheels is available with two and three channel outputs and is suitable for use with Avago Technologies’ optical encoder modules. Compatible encoder modules include HEDS-9000, HEDS-9100, HEDS-9040, and HEDS-9140 series. When used in conjunction with a motion control optical encoder, the Avago Technologies code wheels translate a representative electrical signal from a mechanical position. The code wheels are used for rotary motion and contain data tracks which act as a gate, enabling and preventing light penetration at intervals. Moving shadows (pulse) are generated from these actions and fall onto the photodiodes located on the detector. The metal code wheels, from Avago Technologies, are cost effective and very versatile, with high temperature rating up to 100°C and cycles per revolution (CPR) on a 28mm diameter.

Temperature rating up to 100°C
Resolutions to 1024 CPR (28mm diameter)
Lead Free

Avago Technologies Rotary Encoders

Specificaties
Kenmerk Waarde
Pulses Per Revolution 1000
Encoder Reading Incremental
Shaft Diameter 0.5 in
Mounting Type Through Hole
Maximum Operating Speed 30000rpm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 100)
23,955
(excl. BTW)
28,986
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
100 +
€ 23,955
€ 2.395,50
*prijsindicatie
Related Products
Multiturn rotary encoder in shaft designWith contact-free multiturn ...
Description:
Multiturn rotary encoder in shaft designWith contact-free multiturn level and new intelligent sensing technology (I-S-T)Designed with Integrative Technology®4 (programmable) outputsResolution up to 8192 (13 Bit) per revolution, 4096 (12 Bit) revolutions, corresponds to 25 BitThe following parameters can be ...
Bourns ES14 rotary optical encoder is for industrial ...
Description:
Bourns ES14 rotary optical encoder is for industrial applications requiring long cycle life and high reliability. This optical encoder features a 1/8 ” stainless steel shaft supported by ball bearings with optional PCB mount bracket or cable and connector. Available ...
High resistant to electrostatic noise by using a ...
Description:
High resistant to electrostatic noise by using a plastic shaftCompact size of 16 mm squareWith mechanical ON/OFF push switchLong life.
EN series rotary optical encoders with two channel ...
Description:
EN series rotary optical encoders with two channel quadrature output, a square wave signal and a resolution to 256 PPR. These EN series rotary optical encoders are bushing or servo mount, CMOS and TTL compatible and have a long life ...