Broadcom, HCPL-3140-000E DC Input Transistor Output Optocoupler, Through Hole, 8-Pin DIP

  • RS-stocknr. 237-057
  • Fabrikantnummer HCPL-3140-000E
  • Fabrikant Broadcom
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Isolated Gate Driver Optocouplers, Avago Technologies

The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors. The optocouplers exhibit rail-to-rail output, fast gate switching speed, high Common Mode Rejection (CMR) and reinforced insulation. Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.
The isolated gate driver optocouplers are ideal for use in motor control and power conversion applications. This is a solution where the logic signals is isolated and protected from high voltages.

Optocouplers, Avago Technologies

Specificaties
Kenmerk Waarde
Mounting Type Through Hole
Output Device Transistor
Maximum Forward Voltage 1.8V
Number of Pins 8
Package Type DIP
Input Current Type DC
Typical Rise Time 50ns
Maximum Input Current 12 mA
Isolation Voltage 3.75 kVrms
Logic Output Yes
Typical Fall Time 50ns
105 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1410 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,00
(excl. BTW)
2,42
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 2,00
€ 10,00
50 - 120
€ 1,90
€ 9,50
125 - 245
€ 1,78
€ 8,90
250 - 495
€ 1,658
€ 8,29
500 +
€ 1,502
€ 7,51
*prijsindicatie
Related Products
A range of optocouplers from IXYS, available in ...
Description:
A range of optocouplers from IXYS, available in AC or DC input versions. Suitable applications include; telecom switching, tip/ring circuits, modem switching, loop detection, ring detection and current sensing.
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
The MCT2XXX series optoisolators consist of a gallium ...
Description:
The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package. ApplicationsConsumer AppliancesIndustrial Motor.
The MCT6X optocouplers have two channels for density ...
Description:
The MCT6X optocouplers have two channels for density applications. For four channel applications, two packages fit into a standard 16-pin DIP socket. Each channel is an NPN silicon planar phototransistor optically coupled to a gallium arsenide infrared emitting diode. Two ...