Broadcom, HCPL-J312-300E DC Input Transistor Output Optocoupler, Surface Mount, 8-Pin DIP

  • RS-stocknr. 450-723
  • Fabrikantnummer HCPL-J312-300E
  • Fabrikant Broadcom
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Isolated Gate Driver Optocouplers, Avago Technologies

The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors. The optocouplers exhibit rail-to-rail output, fast gate switching speed, high Common Mode Rejection (CMR) and reinforced insulation. Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.
The isolated gate driver optocouplers are ideal for use in motor control and power conversion applications. This is a solution where the logic signals is isolated and protected from high voltages.

//media.rs-online.com/t_line/L0450650-01.gif

Optocouplers, Avago Technologies

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Output Device Transistor
Maximum Forward Voltage 1.95V
Number of Pins 8
Package Type DIP
Input Current Type DC
Typical Rise Time 0.1µs
Maximum Input Current 16 mA
Isolation Voltage 3.75 kVrms
Logic Output Yes
Typical Fall Time 0.1µs
247 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
301 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,60
(excl. BTW)
3,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,60
10 - 24
€ 1,95
25 +
€ 1,84
Verpakkingsopties
Related Products
This range of optocouplers with darlington output, from ...
Description:
This range of optocouplers with darlington output, from Avago Technologies, offer a high current transfer ratio with low input current requirements. The optocoupler devices use light emitting diodes (LEDs) optically coupled with integrated high gain photodetectors. They provide excellent input-output ...
A range of single channel optocouplers from Lite-On ...
Description:
A range of single channel optocouplers from Lite-On with photo-transistor outputs. These 6-pin devices allow access to the photo-transistor base and are available with a range of minimum current transfer ratios from 20% up to 160%. The range includes both ...
The 4N35, 4N36, 4N37 are optically coupled isolators ...
Description:
The 4N35, 4N36, 4N37 are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode and an NPN silicon phototransistor mounted in a standard 6-pin dual-in-line package. Surface Mount Option Available. All electrical parameters are 100% tested by manufacturing. ...
The ACPL-217-500E is a DC-input single channel half-pitch ...
Description:
The ACPL-217-500E is a DC-input single channel half-pitch phototransistor optocoupler which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SO package. The input-output isolation voltage is rated at 3000 Vrms. Response time, ...