Phoenix Contact Optocoupler, Max. Forward 24 V, Max. Input 7 mA

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact PLC-RSC Series

PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers to a 15 way D-SUB cable.

Features and Benefits

• Relays and opto-couplers for inputs and outputs with "pluggable" switching devices
• Four bridging slots to reduce wiring; bridging of up to 80 modules is possible
• Screw terminal connections
• LED indicators and diodes for coil suppression
• 250V versions have a switched power rating of 1500VA
• Mechanical life (relays) 1 x 107 operations
• Wide range of accessories also available

OPT-24DC/24DC/2

A plug-in miniature solid state relay that offers a floating, 2 wire output circuit. Designed to be assembled in rows with zero spacing and mounting in any position.

Features and Benefits

• RT III protection means it is wash proof
• Shock and vibration resistant
• Operating temperature range of -25°C to +60°C
• Nominal input voltage of 24 Vdc
• Can be soldered onto PCB

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 24 V
Maximum Input Current 7 mA
Isolation Voltage 2.5kV
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Width 5mm
Depth 15mm
Series OPT-24DC/24DC/2
Operating Temperature Range -25 → +60 °C
Dimensions 5 x 28 x 15 mm
157 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
136 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
48,22
(excl. BTW)
58,35
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 48,22
5 - 9
€ 46,27
10 +
€ 45,32
Related Products
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
These DIN rail mount opto-couplers from Phoenix Contact ...
Description:
These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...