Phoenix Contact Optocoupler, Max. Forward 12 V, Max. Input 11 mA

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 12 V
Maximum Input Current 11 mA
Series DEK-OE- 12DC/48DC/100
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,47
(excl. BTW)
38,08
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 31,47
Related Products
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
Interstage networks (interface) as connecting modules, e.g. between ...
Description:
Interstage networks (interface) as connecting modules, e.g. between electronic controllers and peripheral devices or motor contactorsScrew connection1 channelSlim design.
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...