Pico Technology,Differential Oscilloscope Kit

  • RS-stocknr. 136-5309
  • Fabrikantnummer PicoScope 4444 1000 V CAT III kit
  • Fabrikant Pico Technology
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Picoscope 4444 CAT III High Resolution Differential Oscilloscope Kit

The PICOSCOPE 4444 1000 V CAT III KIT from Pico Technology is a high-resolution differential oscilloscope with three PicoConnect 442 1000V CAT III passive differential voltage probes and one TA271 single-ended D9-BNC adaptor. The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter (or no) interface boxes makes multiple differential measurements at the same time while never occupying more than one power socket. It's intelligent probe interface automatically configures the PicoScope display to probes. The four D9 inputs allow to make true differential measurements. The 12bit resolution of the PicoScope 4444 offers 16 times as much vertical detail and its deeper capture memory of 256MS gives it greater horizontal resolution. It is used in non-ground-referenced measurements, safe probing of single phase and 3-phase voltages and currents, measuring power drawn by mobile and IoT devices, hybrid and electric vehicle design, motor drives and inverters.

Deep-memory oscilloscopes (256MS deep memory), waveform buffer and navigator Hardware acceleration engine (HAL3), 100000 waveforms per second
Maximum input range at full scale is ±50V (±1000V using the PicoConnect 442 1000V CAT III probe)
Maximum common-mode range is also ±50V (also ±1000V with the PicoConnect 442 probe)
Low voltage probe for millivolts to 50V and 20MHz bandwidth
1000V CAT III probe for high voltage applications
Rejects common mode noise, signal integrity, digital triggers
Waveform buffer and navigator

Pico Technology Differential Oscilloscope Kit

The Pico Technology PICOSCOPE 4444 1000 V CAT III Kit is a 20Mhz high-resolution differential oscilloscope with three passive differential voltage probes and one TA271 single-ended D9-BNC adaptor. Its intelligent probe interface automatically configures the PicoScope display to probes. The four D9 inputs allow you to make true differential measurements. The 12bit resolution of the PicoScope 4444 offers 16 times as much vertical detail.
The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter (or no) interface boxes. The PicoScope 4444 has high-resolution and deep memory and lets you make multiple differential measurements at the same time, while never occupying more than one power socket. Its intelligent probe interface automatically configures the PicoScope display to your probes, so you don’t have to.

Features and Benefits

• It has 4 channel device
• waveform buffer and navigator Hardware acceleration engine (HAL3)
• Deep memory is 256 MS
• Up to 400 MS/s sampling rate
• High common-mode rejection ratio
• Flexible 12 and 14bit resolution
• Balanced high-impedance inputs for a low circuit load
• Low voltage probe for millivolts to 50V
• True differential measurements in high-resolution
• FFT spectrum analyser
• Intelligent probe interface
• High-resolution offers 64x more detail

Applications

• Non-ground referenced measurements
• Safe probing of single phase and 3-phase voltages and currents
• Measuring power drawn by mobile and IoT devices
• Hybrid and electric vehicle design
• Motor drives and inverters

Certifications

• EN 61010-1:2010
• EN 61326-1:2013
• FCC Part 15 Subpart B

Pico PC Based Instruments

Specificaties
Kenmerk Waarde
Model Number PQ074
For Use With PicoScope 4444 Differential Oscilloscope
Kit Type Differential Oscilloscope Kit
Kit Contents High-Resolution Differential Oscilloscope, PicoConnect 442 1000 V CAT III Passive Differential Voltage Probes x 3, TA271 Single Ended D9-BNC Adapter
Dimensions 190 x 170 x 40mm
Height 40mm
Length 190mm
Width 170mm
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
Was € 1.748,50
1.625,00
(excl. BTW)
1.966,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.625,00
Related Products
Tektronix MDO4000C mixed domain oscilloscopes offer fast acquisition, ...
Description:
Tektronix MDO4000C mixed domain oscilloscopes offer fast acquisition, selectable record length and a full suite of automated measurements to help resolve debug challenges quickly. Add-ons and accessories are available separately, enabling users to customise and upgrade at time of purchase ...
Fluke SCC120B special value kit consists of soft ...
Description:
Fluke SCC120B special value kit consists of soft carrying case, magnetic hanger and screen protector. This kit does not include an optically isolated OC4-USB interface cable. If you require one, please see RS Stock No. 493-5540.
The Keysight N2133A rackmount kit for the InfiniiVision ...
Description:
The Keysight N2133A rackmount kit for the InfiniiVision 1000 X-Series oscilloscopes lets you easily stack your scopes in a rack. The kit installs in less than 1 hour. Requires 4U in 19” rack. Width - 483 mm (19.0 inches) Height ...
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation ...
Description:
Compact, ergonomically designed probes (non-modular) for oscilloscopesIntegral compensation trimmerCable length 1.2m Termination 50Ω BNCVoltage category IEC1010-2-031 300V Cat 1Test voltage 1150VFor accessories kit ( 1 screw driver, 1 BNC adaptor, 1 ground lead, 1 test clip, 1 needle ) see ...