Rohde & Schwarz HVC152 Oscilloscope Software Advanced Input/Output, For Use With HMC8015 Power Analyser

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

R&S Power Analyser Software HVC151, HVC152, HVC153

Advanced Analysis option HOC151 - RS 144-8202

The advanced analysis option complements the base unit's measurands by also displaying peak values for voltage, current and power. These are acquired seamlessly at the full sampling rate of 500 ksample/s.

• Spectrum Analyzer Harmonics as bar chart or table view • Voltage, current and power display of an input signal period over time
• Graphically display of switch‑on behavior
• Peak-Hold function

Advanced-I/O option HOC152 - RS 144-8203

A current‑proportional voltage of 100 mV, 1 V or 4 V (full‑scale amplitude) can be applied to the sensor input (4 mm safety connectors) in order to significantly expand the power measurement range. Current probes, current transformers and shunts can be connected to the input. The gradient (e.g. mV/A) can be set individually.

Activation of the sensor input function for current probe or shunt Limit testing with PASS/FAIL indication 2) for up to 6 limits selectable from 14 measurands (e.g. U, I, P, S, Q, F)

Compliance Test option HOC153 - RS 144-8204

This option includes wizards for the IEC 62301 (standby), EN 50564 (extended standby) and EN 61000-3-2 (harmonic current for EMC, CE approval) standards, making it possible to carry out autonomous measurements without PC. The results are displayed in a table on the screen and can be saved to a USB flash drive in HTML format.

Compliance test for key standby and harmonic standards:
IEC 62301 (Standby-Norm)
EN50564 (Extended standby standard)
EN 61000-3-2 (Harmonic Current for EMC, CE Approval)

Specificaties
Kenmerk Waarde
Accessory Type Advanced Input/Output
For Use With HMC8015 Power Analyser
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
415,00
(excl. BTW)
502,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 415,00
Related Products
Interference analysis (software licence). Great tools for analysing ...
Description:
Interference analysis (software licence). Great tools for analysing and locating ambiguous signals are interferers Allows up to 999 hours of on-air activity to be captured; the recording duration depends on the recording interval setting.
Signal strength mapping measurement application (software licence). Great ...
Description:
Signal strength mapping measurement application (software licence). Great tool for analysing and locating ambiguous signals or interferers Allows up to 999 hours of on-air activity to be captured; the recording duration depends on the recording interval setting.
The Rohde and Schwarz is a mixed-signal upgrade ...
Description:
The Rohde and Schwarz is a mixed-signal upgrade software used for RTC1000 oscilloscopes. For configuring this software into the oscilloscope, the MSO oscilloscope hardware is required. • Quick fault finding and high acquisition analysis rate• Precise measurement up to 5GS/s ...
The Rohde and Schwarz is a serial triggering ...
Description:
The Rohde and Schwarz is a serial triggering and decoding software used for RTC3000 oscilloscopes. For configuring this software into the oscilloscope, the ARINC 429 buses are required. • Fast bus setup in seconds• Colour-coded telegram display• Strong trigger capability ...