LeCroy HDO4K-EMB Oscilloscope Software I²C, SPI, RS-232/UART Decode Software, For Use With HDO4000 Series

Wetgeving en compliance
Land van herkomst: US

Teledyne LeCroy HDO4000 I2C, SPI, UART, RS232 Package HDO4K-EMB

I2C, SPI and UART all have special-use cases and the Teledyne LeCroy trigger and decode solutions address these cases. The I2C trigger can be configured for 7 or 10-bit addressing with or without inclusion of the R/W bit. The SPI trigger can be configured for a range of CPOL and CPHA settings as well as the Simplified SPI protocol. With the UART trigger 8 and 9-bit (8+1) formats are supported. Decode is intuitive, with advanced software algorithms deconstructing the waveform into protocol information, then overlaying the decoded data on the waveform. Decode information condenses or expands depending on the timebase/zoom ratio setting, so understanding messages is easy. Various sections of the protocol are colour-coded to make it easy to understand, especially for users new to I2C, SPI UART, and RS-232 serial data. The decode operation is fast - even with long acquisitions. The user can choose to decode into Hex, Binary, or ASCII formats.

I2C, SPI, UART and RS-232 trigger and decode
Colour-coded decode overlaid on the waveform is intuitive and easy to read
Powerful and flexible conditional DATA triggering
Hex, Binary or ASCII decoding
Decode information expands as the timebase is adjusted or zoomed
Convenient table display with quick "zoom to message" capability
Quick search capability for specific messages
Set an ACK condition (ACK,NO ACK, Don’t Care) in all frame trigger setups (I2C)
Decode does not require clock trace to be displayed (I2C, SPI)
Supports UART address (9-bit) Byte triggering
Supports trigger and decode of user-defined proprietary protocols based on a UART spine

Teledyne LeCroy High Definition Oscilloscopes

Kenmerk Waarde
Accessory Type I²C, RS-232/UART Decode Software, SPI
For Use With HDO4000 Series
Minimum Software Requirement Microsoft Windows Embedded Standard 7 64-Bit
Minimum System Requirement Intel B810 Celeron Processor 1.6 GHz, RAM - 4 GB
Software Name I²C, RS-232/UART Decode Bundle, SPI
Number of Licences 1
Languages Available Chinese, French, German, Italian, Japanese, Korean, Russian, Spanish
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-04-2020, met een levertijd van 1 werkdag.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.590,00
Related Products
For measurement of flux density and magnetic field ...
For measurement of flux density and magnetic field strength of DC,AC and peak magnetic fields in S.I c.g.s units, these two micropressor-controlled menu-driven instruments are the GM07 & GM08 series. Featuring graphical monochrome LCD display, probe polarity inidicator and operating ...
Harmonic analysis up to 31 orders of magnitude, ...
Harmonic analysis up to 31 orders of magnitude, fundamental frequency 40 → 450 Hz, THD measurement and selected order (%, phase, frequency, Vrms).
Automate test sequences with the included Test Flow ...
Automate test sequences with the included Test Flow app. Combined with SCPI commands or Command Expert blocks, Test Flow enables simple sequencing of instrument settings and measurements. Combine multiple instruments together to create your own automated test. Together with full ...
The LeCroy is spectrum analysis software used for ...
The LeCroy is spectrum analysis software used for WaveSurfer 510 oscilloscopes. The spectrum analyser software is a style control for the oscilloscope. • Selects from six vertical scales• Automatically identify frequency peaks• Displays up to 20 markers with interactive table ...