LeCroy T3DSO1000 Series T3DSO1204 Oscilloscope, Digital Storage, 4 Channels, 200MHz

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Teledyne LeCroy T3DSO1000 Series Digital Oscilloscopes

Oscilloscopes are tools used by engineers, designers, and technicians to analyze and measure complicated electronic signals. Oscilloscopes enable you to develop and verify high-performance systems and electronic designs. They are an indispensable tool in any workshop, laboratory or test station.

The Teledyne LeCroy T3DSO1000 series of Oscilloscopes are available with either two channels or four channel models. The two-channel model is available with 100 MHz analogue bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single memory module with 14 Mpts of sample memory. The four-channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 7 Mpts. When only a single channel per ADC is active, the maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts.

The T3DSO1000 series employs a new generation of high speed display technology that provides excellent signal clarity, fidelity and performance. The system noise floor is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The T3DSO1000 also employs a 256-level intensity grading display function and a colour temperature display mode not found in other models in this class. Another powerful addition is the new 1 million-point FFT math function that gives the T3DSO1000 very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response.

T3DSO1204

Features and Benefits

  • 200 MHz bandwidth model

  • Two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has sample rate of 1 GSa/s

  • The newest generation of high speed display technology

  • Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)

  • Supports 256-level intensity grading and colour display modes Record length up to 14 Mpts

  • Digital trigger system

  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern

  • Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN

  • Video trigger, supports HDTV

  • Low background noise with voltage scales from 500 μV/div to 10 V/div

  • 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, math, etc

  • History waveform record (History) function, maximum recorded waveform length is 80,000 frames.

Applications

Digital oscilloscopes are used in a wide array of applications in a multitude of different industries. The oscilloscope is a vital piece of equipment for any professional who is designing, testing or repairing electronic equipment. Some of the most common are;

  • Education

  • Electronic design

  • Medical researchers

  • Television repair technicians

  • Physicists

  • Testing or repairing electronic equipment

  • Data analysis

  • Waveform analysis

Why Teledyne LeCroy?

Teledyne LeCroy oscilloscopes and probes have been designed, manufactured and tested to the highest standards. This ensures high reliability and quality. In the unlikely event, you experience any problems all Teledyne LeCroy digital oscilloscopes are covered by a 3-year manufactures warranty and probes a 1-year warranty.

Q: Are there any accessories available?

  • 177-1272 is for the T3DSO1000-FG AWG Software

  • 177-1269 is for the T3DSO1000-MSO 16 Channel MSO Software

  • 177-1274 is for the T3DS01000-WIFI – WIFI Software

  • 177-1275 is for the T3PP300 is for the passive probe @ 300 MHz bandwidth

LeCroy Digital Oscilloscopes

Specificaties
Kenmerk Waarde
Number of Channels 4
Bandwidth 200MHz
Oscilloscope Type Digital Storage
Series T3DSO1000
Power Source Mains
Display Type TFT LCD
Screen Size 7in
Sample Rate Random 1 Gsps
Model Number p T3DSO1204
36 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
982,00
(excl. BTW)
1.188,22
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 982,00
Kalibratie-opties
Related Products
RS Pro IDS6000A-U Series provides complete remote control ...
Description:
RS Pro IDS6000A-U Series provides complete remote control or data capture over a USB interface. It supports PictBridge which, connected to a compatible printer with a USB cable, facilitates push-button printing. Its MemoryPrime technology allows 2 Mpts of waveform data. ...
These Teledyne LeCroy HDO4000A oscilloscopes have 4 analogue ...
Description:
These Teledyne LeCroy HDO4000A oscilloscopes have 4 analogue input channels, 12-bit resolution using Teledyne LeCroy’s HD4096 high definition technology, up to 1 GHz of bandwidth and a compact form factor with a large 12.1” multi-touch colour LCD display. These digital ...
The Rhode & Schwarz RTB2000 series digital oscilloscopes ...
Description:
The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, ...
70/100/200 MHz (100 and 200 MHz require additional ...
Description:
70/100/200 MHz (100 and 200 MHz require additional option)Make professional measurements, including Bode plotting (FRA), mask testing, math, FFT, and serial triggering/decodeQuickly learn how to use with built-in help and training signalsSee more signal detail at 50,000 wfms/sec update rate. ...