Sauter HBD 100-0. Durometer

  • RS-stocknr. 685-0949
  • Fabrikantnummer HBD 100-0.
  • Fabrikant Sauter
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Shore Hardness Tester, Analogue

HB Series hardness tester with slave pointer for measuring penetration depth
Shore A: rubber, elastomer, neoprene rubber, silicon rubber, vinyl, soft plastics, felt, natural leather and similar materials
Shore C/0: foam, sponge
Shore D: plastics, synthetic resin, resopal, epoxide, perspex etc.
Max. mode for recording peak values
Point mode shows stable measurement value
Dimensions: L x W x H: 115 x 60 x 25 mm
Weight: 160 g

Tester Shore D

Parallels, Surface Finish & Hardness

Surface Finish

Any machined component has a surface geometry which consists of three basic elements:

Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)

Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

Specificaties
Kenmerk Waarde
Tester Type Durometer
19 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was € 147,72
140,00
(excl. BTW)
169,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 140,00
Related Products
RS Pro adjustable parallel set, used for checking, ...
Description:
RS Pro adjustable parallel set, used for checking, marking or positioning work. Consist of two precision ground pieces which slide smoothly on each other. Parallels consist of 2 piece dove tailed together Locked in place by set screwsCan be set ...
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
A compact hand held durometer with drag indicator. ...
Description:
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage. • Measurement of penetration (Shore).
This has reference plates manufactured from electro-formed solid ...
Description:
This has reference plates manufactured from electro-formed solid nickel, which give improved wear characteristics and definition of surface finish. It is invaluable for tactile and visual inspection of machined component finish. Metric Ra and imperial AA samples are included. Supplied ...