- RS-stocknr.:
- 175-0627
- Fabrikantnummer:
- DF3-2428SCFC
- Fabrikant:
- Hirose
20000 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (op een haspel van 10000)
€ 0,053
(excl. BTW)
€ 0,064
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
10000 - 10000 | € 0,053 | € 530,00 |
20000 - 40000 | € 0,051 | € 510,00 |
50000 + | € 0,048 | € 480,00 |
*prijsindicatie |
- RS-stocknr.:
- 175-0627
- Fabrikantnummer:
- DF3-2428SCFC
- Fabrikant:
- Hirose
Datasheets
Wetgeving en compliance
- Land van herkomst:
- JP
Productomschrijving
Low profile design with the mounting height of 6.8mm
Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type.
Crimp Socket: Low profile design with mounting height 7.5mm.
Provide the contact crimping area with the sufficient space, and secures the stable crimping operation.
The board can be connected horizontally or vertically in combination with the straight header with the right angle header.
For horizontal connection, the board to board size is the low profile of 6.6mm.
Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection.
The board pre-fixed kink is treated with the post pin.
The style employs a scoop-proof and sturborn box type.
This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.
Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type.
Crimp Socket: Low profile design with mounting height 7.5mm.
Provide the contact crimping area with the sufficient space, and secures the stable crimping operation.
The board can be connected horizontally or vertically in combination with the straight header with the right angle header.
For horizontal connection, the board to board size is the low profile of 6.6mm.
Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection.
The board pre-fixed kink is treated with the post pin.
The style employs a scoop-proof and sturborn box type.
This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.
Specificaties
Kenmerk | Waarde |
---|---|
Gender | Female |
For Use With | Discrete Wire Connectors |
Series | DF3 |
Termination Method | Crimp |
Maximum Wire Size mm² | 0.2mm² |
Contact Plating | Gold |
Minimum Wire Size AWG | 28AWG |
Contact Material | Phosphor Bronze |
Maximum Wire Size AWG | 24AWG |
Maximum Contact Resistance | 30mΩ |
Minimum Operating Temperature | -35°C |
Maximum Current | 3A |
Maximum Operating Temperature | +85°C |