08-70-0106 Molex BOARD-IN Male Crimp Contact 18AWG

  • RS-stocknr. 670-6256P
  • Fabrikantnummer 08-70-0106
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Board-In Crimp Stand Alone Terminals, Series 5298

These terminals are used as a mechanical holding device to retain a wire in a printed circuit,board until the board is wave soldered. This terminal is not intended to function electrically without,a soldering operation.

Molex Board-In Crimp Terminals

Specificaties
Kenmerk Waarde
Gender Male
Series Board-In
Minimum Wire Size mm² 0.8mm²
Maximum Wire Size mm² 0.35mm²
Termination Method Crimp
Contact Plating Tin
Minimum Wire Size AWG 22AWG
Contact Material Brass
Maximum Wire Size AWG 18AWG
Series Number 5298
4000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (Supplied on a Reel) Quantities below 150 on continuous strip
0,02
(excl. BTW)
Aantal stuks
Per stuk
1000 - 4900
€ 0,02
5000 - 9900
€ 0,019
10000 - 19900
€ 0,018
20000 +
€ 0,018
Verpakkingsopties
Related Products
Molex Mini-Fit pin and receptacle crimp contacts are ...
Description:
Molex Mini-Fit pin and receptacle crimp contacts are connector contacts for use in the Mini-Fit Junior plug and receptacle housings. These crimp pin and receptacle terminals feature multiple points of contact for a reliable electrical connection and a higher current ...
Designed for automotive instrument panel applicationsMechanical lock assures ...
Description:
Designed for automotive instrument panel applicationsMechanical lock assures positive matingUnique housing configuration helps prevent mismatingDouble lock mechanism prevents dislodging of contactsA polarized version is available (for single row, 5 and 6 contacts only)High reliable socket contactsSimplified ...
The sealed Mini-Fit H2O™ IP67-rated system with pre-installed, ...
Description:
The sealed Mini-Fit H2O™ IP67-rated system with pre-installed, integrated interface and wire seals,meets the need for weatherproof, compact connections in wire-to-wire applications up to 9.0A per circuit. Male contacts 46056 Series use with 46065 Series plug stock number 700-1031Female contacts ...
1.25mm Wire to Board CLIK-Mate™ SMT. Use with ...
Description:
1.25mm Wire to Board CLIK-Mate™ SMT. Use with 502380 Series crimp housings typical stock number 660-1022Mates with 502382 Series vertical PCB receptacles and 502382 Series 90° PCB receptacles typical stock numbers 660-1050 and 660-1081 respectively.