TE Connectivity Type F Series Cable Hood Kit for use with Type F Eurocard Connector

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Eurocard Accessories

A range of Accessories for TE Connectivity DIN41612 Eurocard connectors.
Stock number 720-0705 is a dust cover for use with Type C and Type R Eurocard 64 and 96 way receptacle connectors
Stock number 720-0730 is a dust cover for use with Type C and Type R Eurocard 64 and 96 way plug connectors
Stock number 864-3781 is a standard size shroud for use with Type C and Type 48 and 96 way 3 row Eurocard connectors mounted on PCB thickness of 2.36mm
Stock number 745-5656 is a standard size shroud for use with Type C and Type 48 and 96 way 3 row Eurocard connectors mounted on PCB thickness of 3.18mm
Stock number 864-3627 is a cable hood kit for use with Type C Eurocard connectors. Kit contains covers, guide pins, covers for unused exits & strain relief clamp
Stock number 718-8315 is a cable hood kit for use with Type F Eurocard connectors. Kit contains covers, guide pins, covers for unused exits & strain relief clamp
Stock number 745-5741 is a keying kit which includes two guide pins, and two keying plugs with screws
Stock number 680-2483 is a a single keying plug for use with Type B, Type C and Type F Eurocard receptacle connectors
Stock number 718-8368 is a keying plug strip for use with Type B, Type C and Type F Eurocard receptacle connectors. Two keying plugs are moulded to the strip.

Note

Due to product design and shipping, keying plugs (stock number 718-8368) may be separated from strip

DIN41612 - TE Connectivity

Specificaties
Kenmerk Waarde
Accessory Type Cable Hood Kit
For Use With Type F Eurocard Connector
Series Type F
24 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
19,70
(excl. BTW)
23,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 19,70
10 - 19
€ 19,11
20 +
€ 18,52
Verpakkingsopties
Related Products
AMP CT 2 mm MT receptacle housings pre-loaded ...
Description:
AMP CT 2 mm MT receptacle housings pre-loaded with IDC contacts for use with 28 to 26 AWG wire. These AMP CT IDC connectors have a miniature design and feature mating alignment for an accurate connection to the mating header ...
This range of TE Connectivity MT Receptacle Assemblies ...
Description:
This range of TE Connectivity MT Receptacle Assemblies have mass termination IDC contacts. The mating interface of the MT Receptacle Assembly contacts are the same as the AMPMODU crimp, snap-in contact with dual cantilever beams, overstress protection and enclosed box ...
ODVA compliant 8 position RJ45 ethernet receptacle connector ...
Description:
ODVA compliant 8 position RJ45 ethernet receptacle connector kits that meet Ethernet/IP RJ45 requirements with IEC 61076-3-106 Variant 1 compliance for use with Cat 5e cable. These ODVA compliant RJ45 panel mount ethernet connector kits have a zinc die cast ...
ODVA-compliant RJ45 shielded plug Ethernet connector kits that ...
Description:
ODVA-compliant RJ45 shielded plug Ethernet connector kits that meet Ethernet/IP RJ45 requirements with IEC 61076-3-106 Variant 1 compliance for use with Cat 5e cable. These ODVA-compliant RJ45 cable mount Ethernet plug connector kits have a zinc diecast shell, nickel plated ...