Lumberg Minimodul Series Straight Through Hole PCB Header, 4 Contact(s), 2.5mm Pitch, 1 Row(s), Shrouded
- RS-stocknr.:
- 737-8622
- Fabrikantnummer:
- 2,5 MSF 04
- Fabrikant:
- Lumberg
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
860 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Elk (in een pakket van 10)
€ 0,364
(excl. BTW)
€ 0,44
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 10 - 240 | € 0,364 | € 3,64 |
| 250 - 990 | € 0,221 | € 2,21 |
| 1000 - 4990 | € 0,198 | € 1,98 |
| 5000 - 9990 | € 0,193 | € 1,93 |
| 10000 + | € 0,188 | € 1,88 |
| *prijsindicatie | ||
- RS-stocknr.:
- 737-8622
- Fabrikantnummer:
- 2,5 MSF 04
- Fabrikant:
- Lumberg
Datasheets
Wetgeving en compliance
Productomschrijving
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
Specificaties
Kenmerk | Waarde |
|---|---|
| Series | Minimodul |
| Pitch | 2.5mm |
| Number of Contacts | 4 |
| Number of Rows | 1 |
| Body Orientation | Straight |
| Shrouded/Unshrouded | Shrouded |
| Mounting Type | Through Hole |
| Connector System | Wire to Board |
| Termination Method | Solder |
| Contact Material | Brass |
| Contact Plating | Tin |
| Current Rating | 5.0A |
| Voltage Rating | 160.0 V |