LCBS-6-01, 9.5mm High Nylon Locking PCB Support Pillar with 4mm PCB Hole and 4.75mm Chassis Hole

  • RS-stocknr. 220-822
  • Fabrikantnummer LCBS-6-01
  • Fabrikant Richco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Locking PCB Pillars

Nylon PCB support pillars in various heights. This type snaps into place on both the chassis and the board and requires no fixing screws.

Can be released by hand
Material: Nylon 66
Colour: Natural

Specificaties
Kenmerk Waarde
Type Locking
Body Height 9.5mm
Chassis Hole Diameter 4.75mm
PCB Hole Diameter 4mm
PCB Thickness 1.57mm
Material Nylon
12350 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49800 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,145
(excl. BTW)
0,175
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 450
€ 0,145
€ 7,25
500 - 950
€ 0,139
€ 6,95
1000 - 2450
€ 0,135
€ 6,75
2500 +
€ 0,123
€ 6,15
*prijsindicatie
Related Products
PCB supports moulded in nylon, with an adhesive ...
Description:
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fittingThe board to be supported is retained securely by the locking barb, but may be removed when requiredThe support can be permanently ...
PCB supports moulded in nylon, with an adhesive ...
Description:
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fittingThe board to be supported is retained securely by the locking barb, but may be removed when requiredThe support can be permanently ...
Studded circuit board support in Nylon 6//6 with ...
Description:
Studded circuit board support in Nylon 6//6 with releasable bayonet style board mounting head and M-4 screw threaded base for chassis mounting. Screw base can be secured by an M-4 threaded nut in pass-through applications. Releasable head allows for easy ...
Studded circuit board support in Nylon 6//6 with ...
Description:
Studded circuit board support in Nylon 6//6 with releasable bayonet style board mounting head and M-4 screw threaded base for chassis mounting. Screw base can be secured by an M-4 threaded nut in pass-through applications. Releasable head allows for easy ...