ABB CM10 PID Temperature Controller, 97 x 50mm, 2 Output Analogue, Relay, 100 → 240 V ac Supply Voltage ON/OFF

  • RS-stocknr. 736-2838
  • Fabrikantnummer CM10/000S0E0/STD
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

ControlMaster PID Controller CM10

The ControlMaster CM10 is a flexible PID process controller in a 1/8 DIN unit. Detailed process information is presented clearly on the CM10's full-colour TFT display and an intuitive operator interface simplifies configuration and operation. Scalable in both hardware and software functionality, a CM10 can be easily specified to meet the needs of your application requirements. Flexible control functionality including on/off, time proportioning, analogue PID, split output and autotune make the CM10 suitable for a wide range of process applications.

Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM10 can be commissioned rapidly and then tuned via the advanced autotune functionality.

Features and Benefits

• Full-colour 5.5cm (2.2”) TFT display
• User-customisable, intuitive interface with clear text prompts for easy installation, commissioning and operation
• Scalable to match application requirements
• Comprehensive hardware and software options
• Flexible control functionality
• On/Off, time proportioning, analogue PID and split output
• IP66 and NEMA 4X environmental protection

Functionality:

The autotune capability in the CM10 provides automatic calculation of the PID values after initial setup and configuration is completed for rapid commissioning in whatever application.

8 Independent process alarms provide analogue signal monitoring to enable extensive process monitoring functionality. These alarms can be used to drive physical outputs and also have the ability to drive soft-wired functions within the controller itself.

Split output control configuration of the CM10 allows for controlling both heating and cooling of a single process if required.

I/O build:

• 2 Analogue inputs
• 1 Analogue O/P
• 1 Relay

Base Templates:

• Single loop with local setpoint
• Single loop with remote setpoint

Specificaties
Kenmerk Waarde
Output Type Analogue, Relay
Supply Voltage 100 → 240 V ac
Size 97 x 50mm
Number of Outputs 2
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Temperature Range -250 → +300 (Type T Thermocouple) °C, -200 → +1300 (Type N Thermocouple) °C, -200 → +600 (Pt100) °C, -100 → +900 (Type E Thermocouple) °C, -100 → +900 (Type J Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -100 → 1300 (Type K Thermocouple) °C, -18 → +1700 (Type R Thermocouple) °C, -18 → +1700 (Type S Thermocouple) °C, -18 → +1800 (Type B Thermocouple) °C
Control Type ON/OFF
Display Type LCD, Multi Line, TFT
IP Rating IP66
Range ControlMaster CM10
Series CM10
Display Colour Green, Red, Yellow
Panel Depth 121mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
362,34
(excl. BTW)
438,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 362,34
Related Products
Process and program controller with 2 channelsBrilliant 5" ...
Description:
Process and program controller with 2 channelsBrilliant 5" colour display with 27 coloursFreely configurable screen masks50 programs with 1000 sections, dynamically managed16 limit comparatorsSampling time from 50 msSelf-optimisation with vibration and step response methodInput and output modules and interface ...
Accurate indication of temperature and process measurements. Process ...
Description:
Accurate indication of temperature and process measurements. Process interlocks, including overtemperature furnace limits, are implemented using relay output channels. Custom text message display when an event, alarm or process condition occurs Process alarms - four internal alarm setpoints are provided ...
The IR33 series of universal electronic controllers from ...
Description:
The IR33 series of universal electronic controllers from Carel are a panel mounted controller offering an updated and upgraded module to replace its IR32 predecessor. The IR33 series controllers feature two independent control loops and now with the addition of ...
piccoloTM P104 series controllers offer precision PID control ...
Description:
piccoloTM P104 series controllers offer precision PID control of temperature and other processes with many advanced features not normally found in this class of controllers.Designed to offer outstanding performance in an affordable package providing a complete solution for a wide ...