Loctite 270 Pipe & Thread Sealant Liquid for Threadlocking. 10 ml Bottle, -55 → +180 °C

  • RS-stocknr. 514-521
  • Fabrikantnummer 1336326
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 270 Threadlocking

High strength for locking and sealing of threaded fasteners and close-fitting parts after assembly
Penetrates tightened threads, porous materials and cracks by capillary action

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Pipe & Thread Sealant Liquid

The Loctite green 10ml pipe and thread sealant green liquid is designed for permanent locking and sealing of threaded fasteners. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. It is particularly suited for heavy-duty applications such as studs into motor housings, nuts onto studs in pump housings and other fasteners where high strength is required. This product is composed of methacrylate and provides robust curing performance. It not only works on active metals (brass, copper, etc.) but also on passive substrates such as stainless steel and plated surfaces. This product offers high-temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.

Features and Benefits

• Cure time is 24 hours

High-strength general thread locker for maximum efficiency

• Low viscosity
• Operating temperature ranges between -55⁰C and 180⁰C
• Prevents loosening on vibrating assemblies (pumps, gearboxes or presses)
• Proven to be tolerant of minor contamination due to industrial oils (motor oils, corrosion prevention oils and cutting fluids)
• Permits disassembly with hand tools
• Can be disassembled by heating to 300°C

Applications


Works on all the metals, including passive substrates (stainless steel, aluminium and plated surfaces)
• Thread locking

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Threadlocking
Colour Green
Strength High
Minimum Operating Temperature -55°C
Maximum Operating Temperature +180°C
Package Size 10 ml
Product Form Liquid
Trade Name Loctite 270
Chemical Ingredients Methacrylate
Package Type Bottle
Anaerobic Yes
Cure Time 24 h
Operating Temperature Range -55 → +180 °C
Special Features Anaerobic
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
427 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
9,08
(excl. BTW)
10,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 9,08
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill ...
Description:
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill not clog valves or fine filters and has a thixotropic quality which prevents migration of the sealantImpervious to all common hydraulic fluids including fire-resistant syntheticsResistant to Hydraulic Fluids including Synthetics.
For medium strength applicationsSuitable for sealing of pipe ...
Description:
For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsWhen fully cured the sealant can withstand pressures in excess of 200 barIt is suitable for mild steel, cast iron, stainless steel and galvanised pipes.