Loctite 222 Pipe & Thread Sealant Liquid for Threadlocking. 10 ml, -55 → +150 °C

  • RS-stocknr. 517-7464
  • Fabrikantnummer 22214
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 222 Threadlocking Adhesives

Lower strength threadlocking grade for fasteners requiring subsequent adjustment
Distinctive purple colour to aid identification
Thixotropic to prevent migration from the point of application
Lubricates threads during assembly
Easy to remove components
Ideal for non-ferrous components e.g. brass and aluminium

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Pipe & Thread Sealant Liquid

The Loctite purple 10ml pipe and thread sealant liquid is designed for locking and sealing of threaded fasteners, which require easy disassembly with standard hand tools. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is composed of methacrylate and requires no mixing. It is particularly suitable for applications such as adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw. Its thixotropic nature reduces the migration of liquid product after application to the substrate.

Features and Benefits

• Cure time is 6 hours
• Easy to remove components

Low strength
• Low viscosity, thixotropic
• Lubricates threads during assembly
• Operating temperature ranges between -55°C and 150°C
• Prevents loosening on vibrating assemblies like pumps, gearboxes and presses
• Permits disassembly with hand tools

Applications


Ideal for low-strength thread locking of adjusting screws, countersunk head screws and set screws
• Especially suited to small thread sizes
• Ideal for non-ferrous components like brass and aluminium
• Thread locking

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Application Threadlocking
Colour Purple
Strength Low
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 10 ml
Product Form Liquid
Trade Name Loctite 222
Chemical Ingredients Methacrylate
Cure Time 6 h
Operating Temperature Range -55 → +150 °C
142 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
13,46
(excl. BTW)
16,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 13,46
Related Products
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
ROCOL STEAMSEAL is a high pressure, setting pipe ...
Description:
ROCOL STEAMSEAL is a high pressure, setting pipe sealant for metallic threaded and flanged joints. ROCOL® STEAMSEAL is a FOLIAC graphite & manganese compoundHigh pressure pipe sealant for metallic threaded and flanged jointsHeavy duty industrial black pipe jointing compoundEfficient sealing ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.