Rite-Lock Pipe & Thread Sealant for Pipe Sealing. 50 ml Bottle, -50 → +150 °C

  • RS-stocknr. 705-9191
  • Fabrikantnummer PS77
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

RITE-LOK™ PS77 pipe sealant

RITE-LOK™ PS77 is used to lock and seal medium to large sized threads on pipes with a diameter of 15 → 80 mm
It prevents slackening caused by vibrations and leakage through the pipe threads
It also develops a medium breakaway torque, but a low residual torque, which allows it to be easily removed for maintenance operations
A product that cures in the absence of air and when it is in contact with metal surfaces
Breakaway torque: typical value between 8 →18 N.m
Operating temperature: -50 °C → +150 °C

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Pipe Sealing
Colour Yellow
Strength Medium to High
Minimum Operating Temperature -50°C
Maximum Operating Temperature 150°C
Package Size 50 ml
Trade Name Rite-Lock
Chemical Ingredients Dimethacrylate
Package Type Bottle
Anaerobic Yes
Cure Time 24 h
Operating Temperature Range -50 → +150 °C
Special Features Anaerobic
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.
Resin with PTFE for sealing large pipes and ...
Description:
Resin with PTFE for sealing large pipes and stainless steel threads in industrial installations: water, low-pressure steam, air, hydraulic fluids, nitrogen, etc.Lubricating effect to assist with assembly and prevent thread damage.