Omron PLC I/O Module -

  • RS-stocknr. 510-1518
  • Fabrikantnummer CJ1W-SCU21
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Communication Modules

CJ1 Digital I/O, Analogue I/O, and Communication modules clip together to the right of the CPU in any combination up to a maximum of 10 modules. A further 10 modules can be connected to a CJ1M-CPU13 or CJ1M-CPU23 based system as part of an expansion assembly.

Dimensions: Height 90mm, Width 31mm, Depth 89mm

Specificaties
Kenmerk Waarde
Accessory Type PLC I/O Module
For Use With CPU Racks
Series CJ Series
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
533,50
(excl. BTW)
645,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 533,50
Related Products
The Omron PLC expansion module has 4 inputs ...
Description:
The Omron PLC expansion module has 4 inputs and 2 outputs. It has many advanced functions like line disconnection detection, input averaging, scaling, input peak value holding, output holding, ratio conversion and offset/ gain adjustment. Direct conversion instructions for high-speed ...
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
A range of NX-ID series Digital input units ...
Description:
A range of NX-ID series Digital input units from Omron. These NX-ID digital I/O units are for high-speed synchronous control & general purpose and selectable synchronous I/O refreshing or free run refreshing is possible by connecting with the EtherCAT coupler. ...