Mitsubishi Base for use with FX3 Series

  • RS-stocknr. 539-0875
  • Fabrikantnummer FX3U-422-BD
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Communication Modules

Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can be used for applications such as communication with a PC, printer or bar code reader while the RS422 interfaces provide a second programming port which enables an operator panel (HMI) and a programming PC to be connected at the same time. The RS 485 interfaces allow networking of FX PLCs and a simple way of connecting to Mitsubishi inverter drives using the built-in protocol instructions. The USB BD module offers connectivity to PCs via USB for programming purposes.

Note

The ADP modules fit on the left-hand side of FX3U base units and require one of the following modules to connect to the PLC: FX3U-232-BD (539-0869), FX3U-422-BD (539-0875), FX3U-485-BD (539-0881), FX3U-USB-BD (539-0897), FX3U-CNV-BD (539-0904)
A maximum of two ADP communications modules or one ADP and one BD communications modules can be fitted at any one time to a base unit. Supply voltage is taken from PLC base unit.

Mitsubishi FX3U

FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.

Specificaties
Kenmerk Waarde
Accessory Type Base
For Use With FX3 Series
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
157,95
(excl. BTW)
191,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 157,95
5 - 9
€ 151,63
10 +
€ 146,90
Related Products
Introducing the latest in the line of KUNBUS' ...
Description:
Introducing the latest in the line of KUNBUS' Revolution Pi product range, the RevPi Connect. This is your solution to IIoT machine and plant engineering. Open source design allows varying levels of customisation with limitless possibilities. • 2 x RJ45 ...
Module for direct connection of actuator or sensor ...
Description:
Module for direct connection of actuator or sensor signal lines.Direct connection to the ribbon cable by male connector in accordance with IEC 603 1/DIN 41 651.Screw terminal for sensor and actuator connections.Label holder for module identification.DIN rail fitting.
Two PPI programming cables for programme uploading, downloading ...
Description:
Two PPI programming cables for programme uploading, downloading and monitoring, at baud rates of 9.6k, 19.2k or 187.5k. Token handling is performed in the cable giving faster and more reliable access to multi-mode networks. RS-232 (serial) version connects directly to ...
Mechanical modules to record power modulesTo mount upright ...
Description:
Mechanical modules to record power modulesTo mount upright wiring kit via self-constructing potential railsPositive interconnection technologyReplaceable terminal box, even from middle of station networkHigh data security with self-constructing shield coverage on the back-plane busOption to colour-code the ...