Eaton MFD-AC-CP8, MFD-CP10 PLC I/O Module 2 (Analogue), 2 (PT100), 6 (Digital) Inputs, 4 Outputs 24 V dc

  • RS-stocknr. 133-298
  • Fabrikantnummer 106042
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

I/O Modules

Easy-MFD I/O modules clip to the rear of the CPU and may be selected as required for the application. The analogue I/O voltage range is 0 to +10Vdc

Note

To use one of these modules you will also need a Display Unit (typical stock no. 478-9836) and a PSU-CPU-logic Controller Module (typical stock no. 478-9858). If further I/O is required, mounting kit stock no. 479-6430 and digital expansion modules from the Easy range may be used.

Eaton MFD-Titan

The MFD-Titan multi-function display is available as modular components which can be assembled to suit your requirements.,One option is to use a display unit mounted on the front of a panel, coupled directly to a rear of panel PSU-CPU logic controller module (the data and supply lines are coupled through a connector which is integrated within one of the two 22.5mm diameter mounting bosses). With the addition of one of a choice of four clip-on digital and analogue I/O modules, you end up with a panel mounted controller which is equivalent in power and features to an easy800, combined with a flexible HMI.If you need additional I/O, a mounting kit is available which enables one of the digital expansion modules from the easy range to be used as well.,Alternatively, to add a flexible HMI to an easy controller, the display unit can be coupled through the panel to a display repeater module. This in turn is connected to an easy controller using the supplied five metre serial lead, which can be shortened (at the communication module end) if required. Two display repeater modules are available, one suits the easy500 and 700, the other suits the easy800.

Specificaties
Kenmerk Waarde
Manufacturer Series MFD-AC-CP8, MFD-CP10
Number of Inputs 2 (Analogue), 2 (PT100), 6 (Digital)
Number of Outputs 4
Input Type Analogue, Digital, PT100
Output Type Transistor
For Use With MFD-AC-CP8, MFD-CP10
Number of I/O 14
Voltage Category 24 V dc
Length 90mm
Width 89mm
Depth 25mm
Dimensions 90 x 89 x 25 mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -25°C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Equipped with astounding memory and performances, this featherweight ...
Description:
Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution. Data rate: 20kb/s to ...
SCALANCE access points with two built-in radio interfacesFor ...
Description:
SCALANCE access points with two built-in radio interfacesFor designing Industrial Wireless LAN (IWLAN) radio networksReliable communicationEncryption protects against unauthorized accessSuitable for mounting outdoors.
Supplied in die-cast casings for extra durability, and ...
Description:
Supplied in die-cast casings for extra durability, and available in full height and half height modules. With the exception of the first slot (that will only accept a full height module), 1 slot within the Micro PLC rack can accommodate ...
Digital input and outputs for the ET 200SConnect ...
Description:
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).