Omron NX Digital I/O Module 4 Inputs, 12 24 V dc, 12 x 71 x 100 mm

  • RS-stocknr. 136-2791
  • Fabrikantnummer NXID3417
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

NX-ID Digital Input Units

A range of NX-ID series Digital input units from Omron. These NX-ID digital I/O units are for high-speed synchronous control & general purpose and selectable synchronous I/O refreshing or free run refreshing is possible by connecting with the EtherCAT coupler. The digtal I/O units are available with 4 or 8 digital inputs. All digital I/O units are reliable and excellent quality

Features & Benefits

High-speed I/O refreshing is possible by connecting with the EtherCAT Coupler. I/O refreshing can be synchronized with the control cycle of the Controller. (Synchronous refreshing)
ON/OFF response time of the high-speed model is 100 μs max, which enables high-speed, high-precision control.
The removable screwless terminal block improves maintenance.
Screw-less clamp terminal block significantly reduces wiring work.
12-mm-wide unit can save space.
The lineup including 4-point, 8-point, and 16-point types enables ideal system configuration for your system.

Omron NX Series

Specificaties
Kenmerk Waarde
Manufacturer Series NX
Number of Inputs 4
Input Type Digital
For Use With CJ PLC, EtherCAT Coupler Unit, NX Series CPU Unit
Number of I/O 4 (Input)
Voltage Category 12 24 V dc
Module Type DC Input
Length 12mm
Width 71mm
Depth 100mm
Dimensions 12 x 71 x 100 mm
Special Features Detachable Terminals for Easy Maintenance, High-Speed I/O Refreshing Using EtherCAT Couple
Input Current 6mA
Minimum Operating Temperature 0°C
Connection to Host Connector
Supply Voltage 12 24 V dc
Maximum Operating Temperature +55°C
Mounting Type Panel Mount
Application Communication
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
48,74
(excl. BTW)
58,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 48,74
Related Products
The BMX AMM 0600 module is a high-level ...
Description:
The BMX AMM 0600 module is a high-level analogue input/output module with 4 non-isolated voltage or current inputs and 2 non-isolated voltage (±10V) and current outputs. The module offers:. Protection of the module against overvoltagesConversion of digital signals (11 bits ...
NX series IO-Link master unit form Omron. The ...
Description:
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
The Q series is a modular system; if ...
Description:
The Q series is a modular system; if the application demands more input units you simply add more to the system. In this way it is easy to add input signal capacity. 32 digital transistor output channels rated at 24Vdc ...
The new remote communications offer for the popular ...
Description:
The new remote communications offer for the popular range of Zelio Logic smart relays from Telemecanique enables unmanned applications to be monitored or controlled remotely. Communication interface module, which is connected between the smart relay and a modem. This module ...