Wago I/O SYSTEM 750 PLC I/O Module 4 Outputs 24 V dc, 100 x 12 x 64 mm

  • RS-stocknr. 508-3909
  • Fabrikantnummer 750504
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Wago I/O system digital outputs

TOR digital output terminals
Fast Cage Clamp® connection system
Electrical supply through the coupler
Easy identification by red colour coding

Wago PLC I/O Module

The Wago is a 24VDC PLC I/O module has 4-relay output channels that provide with 0.5A current. The connected load is switched via the digital output from the control system. All outputs are electronically short-circuit protected. Each of its output channels is electrically isolated from the bus by use of optocouplers. The module is compatible with 750 series PLCs.

Features and Benefits

• TOR digital output terminals
• Fast cage clamp connection system
• Electrical supply through the coupler
• Operating temperature ranges between 0°C and 55°C

Certifications

• CE
• IP20 rated
• IEC 61131-2
• UL 121201
• IEC 60079-0
• EN 60079-0

Wago I/O system range

Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (508-3959)

Specificaties
Kenmerk Waarde
Manufacturer Series I/O SYSTEM 750
Number of Outputs 4
Output Type Digital
For Use With 750 Series
Voltage Category 24 V dc
Module Type Output Module
Length 100mm
Width 12mm
Depth 64mm
Dimensions 100 x 12 x 64 mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
41,25
(excl. BTW)
49,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 41,25
Related Products
SCALANCE client module for Ethernet applicationFor designing Industrial ...
Description:
SCALANCE client module for Ethernet applicationFor designing Industrial Wireless LAN (IWLAN) radio networksReliable communicationEncryption protects against unauthorized accessLED status displaysFor installation in a device or control cabinet.
I/O expansion module for use with a nanoLine ...
Description:
I/O expansion module for use with a nanoLine base unit (e.g. RS stock no.: 575-018)Galvanically separatedScrew connectionTop-hat rail mountingSupply voltage 24 Vdc (via base unit)Typical supply current 50 mA, max. 90 mATypical response time AN 60 μsOutput current max. each ...
A range of NX-ID series Digital input units ...
Description:
A range of NX-ID series Digital input units from Omron. These NX-ID digital I/O units are for high-speed synchronous control & general purpose and selectable synchronous I/O refreshing or free run refreshing is possible by connecting with the EtherCAT coupler. ...
Range of couplers for analogue and digital signals.Enables ...
Description:
Range of couplers for analogue and digital signals.Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus.Configuration simplified with switches or rotary encoders.The joint should be connected to the end of the loop, to guarantee correct transmission of the ...