Mitsubishi Q Controller Base Unit 5 Slots, DIN Rail Mount

  • RS-stocknr. 455-6721
  • Fabrikantnummer Q35B-E
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Main Base Unit

The Main Base Unit is used for holding and coupling CPU’s, power supply module’s, input modules, output modules and special function modules.

The modules are automatically addressed
The units are mounted by means of screws or on a profiled rail with an integrated adaptor
Applicable power supply modules: Q61P-A1, Q61P-A2, Q63P

Mitsubishi Q Series CPU's and I/O Bases

The Mitsubishi Q Series is highly flexible. It can be a single or multi processor solution, with up to four CPUs installed on the same backplane. Users can also opt to swap PLC CPUs with motion control CPUs or even add a PC directly (as an intregal part) to the PLC backplane. Q Series can meet modern process challenges by offering an “Automation Rich Environment” from the combination of advanced PLC technology with Motion and a PC as one seamless solution with no networking requirement between them. The Q Series replaces the Mitsubishi A series of PLCs.

Easy to set up and to expand a system
Fast processing speeds and large memory capacity
Uses Windows based GX software

Specificaties
Kenmerk Waarde
Manufacturer Series Q Controller
For Use With MELSEC Q Series
Module Slots 5
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
177,45
(excl. BTW)
214,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 177,45
Related Products
Cantilever arms can be used for supporting and ...
Description:
Cantilever arms can be used for supporting and mounting air condition units or pipeline to walls, and are also used with channel/Strut.
There are two basic types of emergency lighting ...
Description:
There are two basic types of emergency lighting luminaires - maintained and non-maintained.,Maintained,These luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), ...
Body constructed from ABS and lens Polycarbonate. All ...
Description:
Body constructed from ABS and lens Polycarbonate. All units are IP65. Suitable for panel mounting applicationsPolycarbonate caps have a shock resistance of 20J according to ENV50014Tube mounting adaptor availableVandal proof.
The Extension Base Units are connected to the ...
Description:
The Extension Base Units are connected to the Main Base Unit by means of assembled bus cables. They provide slots for a power supply module and extra I/O modules. A PSU must be fitted to the Extension Base Unit if ...