Knipex Hand Ratcheting Crimping Tool for Open Barrel Terminal, 0.1 → 1.5mm² Wire

- Extremely user-friendly crimping pliers with lever transmission
- For non-insulated, open plug connectors (2.8 + 4.8 mm plug width and a capacity of 0.1 - 1.5 mm²)
- Toggle lever system for high efficiency
- Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
-Capacities mm² / AWG : for non-insulated open barrel connectors from 0.1 to 1.5 mm² - AWG 27 to 16
- Material: special grade chrome vanadium electric steel, oil-hardened

Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop

- To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil