Knipex 35 42 Bevel Precision Diagonal Cutter
- RS-stocknr.:
- 238-6961
- Artikelnummer Distrelec:
- 180-57-928
- Fabrikantnummer:
- 35 42 115
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 47,07
(excl. BTW)
€ 56,95
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 11 stuk(s) vanaf 26 januari 2026
- Plus verzending 6 stuk(s) vanaf 26 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 47,07 |
*prijsindicatie
- RS-stocknr.:
- 238-6961
- Artikelnummer Distrelec:
- 180-57-928
- Fabrikantnummer:
- 35 42 115
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Long Nose Plier | |
| Sub Type | Precision Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 115mm | |
| Jaw Width | 8mm | |
| Jaw Length | 22.5mm | |
| VDE/1000V Approved | No | |
| Application | Electronic, Precision Cutting, Small Component, Diagonal Cutter | |
| Height Safe | No | |
| Jaw Material | Ball Bearing Chrome Steel | |
| ESD Safe | No | |
| Grip Material | Multi Component Plastic | |
| Handle Material | Forged Steel | |
| Maximum Cutting Capacity | 3.8mm | |
| Standards/Approvals | ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | |
| Cut Type | Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Long Nose Plier | ||
Sub Type Precision Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 115mm | ||
Jaw Width 8mm | ||
Jaw Length 22.5mm | ||
VDE/1000V Approved No | ||
Application Electronic, Precision Cutting, Small Component, Diagonal Cutter | ||
Height Safe No | ||
Jaw Material Ball Bearing Chrome Steel | ||
ESD Safe No | ||
Grip Material Multi Component Plastic | ||
Handle Material Forged Steel | ||
Maximum Cutting Capacity 3.8mm | ||
Standards/Approvals ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | ||
Cut Type Bevel | ||
Vrijgesteld
- Land van herkomst:
- DE
Pliers - 45° flat smooth tips - 115mm
The Knipex electronics plier has narrow sleeves pulled up to the head of the plier enable the tool to be guided securely and comfortably, also between thumb and index finger. It has Smooth ground gripping surfaces. It has 115 mm length. The polishing or mirror polishing (only finish 2) in combination with the thin oil layer offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles.
Features and Benefits
Bi-material sheathing
Precision pliers for high-precision assembly work, e.g. in the fields of electronics and precision mechanics - For gripping, holding and bending
Precision hinge with a gap between the jaws
Smooth inside of the jaws
Carefully deburred edges;Chrome plated steel for ball bearings
Standards
DIN ISO 9655