Rittal Plinth for use with Enclosure Type CM
- RS-stocknr.:
- 826-2887
- Fabrikantnummer:
- 8601605
- Fabrikant:
- Rittal
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 826-2887
- Fabrikantnummer:
- 8601605
- Fabrikant:
- Rittal
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
Rittal TS IT Plinths
Base/plinth front and rear
Base/plinth component consisting of one trim panel and two pre-configured corner pieces
Height: 100 mm
Grey (RAL 7035) sheet steel base/plinth and plastic cover caps
Supplied with: 2 x base/plinth components, 4 x cover caps, 4 x screws and captive nuts M12 for mounting on the enclosure
Height: 100 mm
Grey (RAL 7035) sheet steel base/plinth and plastic cover caps
Supplied with: 2 x base/plinth components, 4 x cover caps, 4 x screws and captive nuts M12 for mounting on the enclosure
Base/plinth side trim panels
For mounting between the base/plinth components
At 200 mm height, two 100 mm base/plinth trim panels may be used
Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components
Height: 100 mm
Sheet steel with grey (RAL 7035) finish
Supplied with: 2 x base/plinth trim panels and parts for attaching to the base/plinth components
At 200 mm height, two 100 mm base/plinth trim panels may be used
Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components
Height: 100 mm
Sheet steel with grey (RAL 7035) finish
Supplied with: 2 x base/plinth trim panels and parts for attaching to the base/plinth components
Specificaties
Kenmerk | Waarde |
|---|---|
| Type | Plinth |
| For Use With | Enclosure Type CM |
| Material | Steel |
- RS-stocknr.:
- 826-2887
- Fabrikantnummer:
- 8601605
- Fabrikant:
- Rittal