- RS-stocknr.:
- 750-8977
- Fabrikantnummer:
- UCP207
- Fabrikant:
- RS PRO
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
65 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 26,05
(excl. BTW)
€ 31,52
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 26,05 |
5 - 9 | € 25,52 |
10 + | € 25,01 |
- RS-stocknr.:
- 750-8977
- Fabrikantnummer:
- UCP207
- Fabrikant:
- RS PRO
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Pillow Block Bearing 35 mm ID
If you need a low-maintenance way to support a rotating shaft, turn to this pillow-block bearing from RS PRO. It's suitable for use in low-loading conditions that don't require the exceptionally high strength of a plummer block. You'll commonly find it in industrial settings such as manufacturing plants, farms and shipping yards.
The bearing is easy to attach to your equipment as it's housed inside a mounting block with pre-drilled holes. It's also quick to install as it comes pre-greased. To prevent damage and keep water and dirt out of your machinery, there's a seal around the bearing.
This part has been rigorously tested by engineers for quality and safety. This type of unit is frequently used in heat-treatment facilities, packaging machinery and conveyor systems.
The bearing is easy to attach to your equipment as it's housed inside a mounting block with pre-drilled holes. It's also quick to install as it comes pre-greased. To prevent damage and keep water and dirt out of your machinery, there's a seal around the bearing.
This part has been rigorously tested by engineers for quality and safety. This type of unit is frequently used in heat-treatment facilities, packaging machinery and conveyor systems.
Features and Benefits
- Pillow-block bearing unit type
- Centre height of 47.6 mm
- Depth of 42.9 mm
- Inside diameter of 35 mm
- Length of 167 mm
- Overall height of 93 mm
- Cast-iron material
- Mounting hole centre-to-centre of 127 mm
- Mounting hole size of 17 mm
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 35mm |
Bearing Unit Type | Pillow Block |
Material | Cast Iron |
Centre Height | 47.6mm |
Mount Hole Size | 17mm |
Length | 167mm |
Depth | 42.9mm |
Overall Height | 93mm |
Mount Hole Centre-to-Centre | 127mm |