RS PROMetric Dial Indicator, 0 → 5 mm Measurement Range, 0.005 mm Accuracy
- RS-stocknr.:
- 123-0920
- Fabrikant:
- RS PRO
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 52,45
(excl. BTW)
€ 63,46
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 52,45 |
Kalibratie-opties
- RS-stocknr.:
- 123-0920
- Fabrikant:
- RS PRO
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Metric Dial Indicator, 0→ 5 mm Measurement Range, 0.005 mm Accuracy
This dial indicator from RS PRO is perfect for taking precision measurements in machine-shop applications. It can be used to take measurements in the range 0 mm to 5 mm. It's accurate to within 0.0005 mm.
The indicator comes with an adjustable dial, with hardened and ground racks to help you make precise adjustments. The ball anvil touches the object being measured at only one point, making it ideal for measuring the thickness of rounded surfaces such as tubes. A lug-back fitting allows you to mount the indicator by its backing plate. Tolerance pointers enable rapid checking of parts.
The indicator meets the American National Standards Institute (ANSI) ESD S20.20:2014 and British Standard (BS) EN 61340-5-1:2007 electrostatic control standards, guaranteeing it won't damage equipment via electrostatic discharge. Plunger-dial indicators like this are used to check variation in tolerance of machined parts and for small-measurement registration or indication.
The indicator comes with an adjustable dial, with hardened and ground racks to help you make precise adjustments. The ball anvil touches the object being measured at only one point, making it ideal for measuring the thickness of rounded surfaces such as tubes. A lug-back fitting allows you to mount the indicator by its backing plate. Tolerance pointers enable rapid checking of parts.
The indicator meets the American National Standards Institute (ANSI) ESD S20.20:2014 and British Standard (BS) EN 61340-5-1:2007 electrostatic control standards, guaranteeing it won't damage equipment via electrostatic discharge. Plunger-dial indicators like this are used to check variation in tolerance of machined parts and for small-measurement registration or indication.
Features and Benefits
• Accuracy of 0.005 mm
• Metric
• Maximum measurement of 5 mm
• Measurement range of 0 to 5 mm
• Metric
• Maximum measurement of 5 mm
• Measurement range of 0 to 5 mm
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Measurement | 5mm |
| Accuracy | 0.005 mm |
| Measurement Range | 0 → 5 mm |
| Imperial or Metric | Metric |