Mitutoyo 543-494BMetric Plunger Dial Indicator, 0 → 50.8 mm Measurement Range, 0.01 mm Resolution , 0.04 mm

  • RS-stocknr. 794-3591
  • Fabrikantnummer 543-494B
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

ABSOLUTE DIGIMATIC indicator ID-C

Easy-to-read indicator with full-size digits.
GO/NG tolerance display.
Unlimited response speed eliminates spindle over-speed errors.
Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching.
Resolution: 0.001mm/0.01mm
Accuracy: 0.003 mm.
Measuring force less than 1.5 N.

Mitutoyo Absolute Digimatic Indicator

The Mitutoyo absolute Digimatic indicator has a range of 50.8mm. Unlike the conventional Digimatic indicators that simply display a spindle displacement, this calculation-type Digimatic indicator incorporates an internal calculation function in place of spindle displacement. This indicator comes with fixtures that facilitate easy measurements of a feeler, inside diameter and radius of curvature measurement without the hassle of conversion tables of equivalents. It always determines the spindle’s absolute position from the origin at power ON by employing an absolute linear encoder. Its unlimited response speed helps to eliminate over-speed errors.

Features and Benefits

Accuracy is 0.04mm
Resolution is 0.01mm
GO/NG display
Large LCD display
ABS absolute characteristics
Preset function
Large and easy to read LCD
Tolerance setting
SPC data output
Measuring direction can be reversed
Indicator face can be rotated 330° to an appropriate angle for easy reading
Magnified judgement results

Applications

Automotive
Machining
Fabrication
Workshops
Manufacturing units

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Maximum Measurement 50.8mm
Accuracy 0.04 mm
Resolution 0.01 mm
SPC Data Output Yes
Zero Resettable Yes
Measurement Range 0 → 50.8 mm
Imperial or Metric Metric
Metric-Imperial Conversion Yes
Battery Operated Yes
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
652,58
(excl. BTW)
789,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 652,58
Kalibratie-opties
Related Products
A precision plunger dial indicator with a large ...
Description:
A precision plunger dial indicator with a large 60mm/ 2.35in dial. Ideal or general purpose workshop or precision machine shop use. Rotating bezel with bevel lockAdjustable dialBuilt in tolerance pointersM2.5 diameter ball anvil measuring contactLug back mounting fitted as standard. ...
Comparing element for hard-to-reach elements, adjustment of machine ...
Description:
Comparing element for hard-to-reach elements, adjustment of machine tools and comparative measurements.High sensitivity and immediate response time thanks to ruby bearings.Automatic inversion sensing lever, anti-reflective, scratch-resistant glass, tungsten carbide switch lever and dovetailed attachment.Available ...
A precision dial comparator with solid box type ...
Description:
A precision dial comparator with solid box type housing. Shockproof movementBall guide plunger mechanism, jewelled movementConstant measuring forceStainless steel mounting shank and spindleAdjustable tolerance markersKnurled fine adjustment screw.
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.