Norgren Relief Valve, 1/2 in G 1/2 Female

  • RS-stocknr. 184-4491
  • Fabrikantnummer V64H-4GD-RMN
  • Fabrikant Norgren
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Plug-in Pressure Relief,Valve

Essential for the safe release of pressure build-up in a system
Plugs directly into an airline (unit is supplied in an individual yoke) or can be plugged into a 1/2 in Olympian® Plus yoke or an existing 1/2 in Olympian® yoke
Zinc alloy body
Aluminium alloy bottom plug
Steel adjusting screw

Caution

Before commencing any maintenance, shut off the air supply and exhaust the downstream pressure. This can be done with an exhaust type ball valve.

//media.rs-online.com/t_line/L722738-01.gif

Valves & Switches

Olympian® is a registered name of Norgren

All Olympian® Plus units must be mounted in yokes which can be ordered separately, or used with existing 1/2 in Olympian yokes. Gauges must be ordered separately.
Olympian® Plus pressure relief valves and flowmeters have retained the Olympian® screw fitting and are fully compatible with Olympian® and Olympian® Plus.

Quarter-turn graphite impregnated clamp rings
Safety detent action preventing removal under pressure.

Specificaties
Kenmerk Waarde
Manufacturer Series V64H
Connection Type Threaded
Threaded Connections G 1/2 Female
Threaded Connection - Gender Female
Threaded Connection Size 1/2 in
Minimum Operating Pressure 0.3bar
Threaded Connection Type G
Maximum Operating Pressure 17 bar
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
168,90
(excl. BTW)
204,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 168,90
5 - 9
€ 163,73
10 +
€ 158,44
Related Products
Rapid exhaust of volumes of air enabling higher ...
Description:
Rapid exhaust of volumes of air enabling higher cylinder speeds. Poppet ValveBrass body nickel platedworking pressure 0.3 → 10 barTemperature range -18 → 70 °C.
The SMC Series AMC Exhaust Cleaner has been ...
Description:
The SMC Series AMC Exhaust Cleaner has been designed to ensure clean plant air is available, and additionally, to reduce noise within a pneumatic system. The exhaust cleaner unit must be mounted vertically, and a suitable mounting bracket is included. ...
The function fittings of Aignep have been designed ...
Description:
The function fittings of Aignep have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they respond to the most estreme demand of pneumatic: flow controls, pressure regulators, unidirectional valves, block ...
Suitable for vacuum pressures of -0.03 to -0.99 ...
Description:
Suitable for vacuum pressures of -0.03 to -0.99 barLow cracking pressure of 0.02 barPositive and vacuum compatibleOperating temperature range : +5 to +60°CAvailable in Mpa measurementNPT threadform ports (1/8", 1/4" & 1/2") also available.