SMC 3 Finger Double Action Pneumatic Gripper, MHS3-20D

  • RS-stocknr. 245-0003
  • Fabrikantnummer MHS3-20D
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: JP
Productomschrijving

MHS Series Three and Four Finger Precision

The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are a compact, lightweight design with a reduced height and easy mounting alignment.

Light and compact
Auto switch capable
Can be mounted from two directions
High repeatability:± 0.01 mm

//media.rs-online.com/t_line/L244996-01.gif
//media.rs-online.com/t_line/L244998-02.gif
//media.rs-online.com/t_line/L245000-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series MHS3
Action Double
Number of Fingers 3
Gripping Type Parallel
Maximum Operating Pressure 0.6 MPa
Port Connection M5 x 0.8
Weight 100g
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
463,20
(excl. BTW)
560,47
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 463,20
Related Products
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
Angular style, compact, air gripperSmallest size and lightest ...
Description:
Angular style, compact, air gripperSmallest size and lightest weight in the MHC seriesBody thickness: 10mmBore size: ø7mmFinger material: martensitic stainless steelAction: single acting, normally open.
The Festo radial gripper DHRS-25-A indicated opening and ...
Description:
The Festo radial gripper DHRS-25-A indicated opening and closing times [Ms] were measured at room temperature at an operating pressure of 6 bar with the gripper horizontally mounted and without additional gripper fingers (mean values shown). The grippers must be ...
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...