SMC Pneumatic Guided Cylinder 15mm Bore, 50mm Stroke, CXSM Series,

  • RS-stocknr. 350-0648
  • Fabrikantnummer CXSM15-50
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

SMC CXS Dual-Rod Cylinder Range

SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer cushioning. Integral stroke adjustment may be set to standard stroke less 5mm. The cylinders incorporate a recess for auto switches, and may be used in operating environments from 5 to 60°C.

Specificaties
Kenmerk Waarde
Manufacturer Series CXSM
Bore 15mm
Stroke 50mm
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Dimensions 129 x 20 x 58mm
Weight 360g
Maximum Operating Temperature +60°C
Length 129mm
Width 20mm
Height 58mm
Minimum Operating Temperature -10°C
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
232,35
(excl. BTW)
281,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 232,35
Related Products
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...