SMC Single Action Pneumatic Pin Cylinder, CJ1B4-5SU4

  • RS-stocknr. 264-6125
  • Fabrikantnummer CJ1B4-5SU4
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Pneumatic Needle Cylinders

Designed to automate delicate operations
Plug directly into 4mm OD x 2.5mm ID tubing, available separately
Single acting - spring retracting
Non-lubricated

Test pressure10.5 Bar
Operating pressure 3 bar (min) to 7 bar (max)
Ambient and fluid temperature -10°C to +70°C
Piston speed 50-500mm/sec
Non-cushioned
Stroke tolerance +0.5mm -0mm

Note

Outward Thrust and Return Thrust or Pull are calculated at maximum operating pressure (7 bar)

//media.rs-online.com/t_line/L264611-01.gif
//media.rs-online.com/t_line/LD264611-01.gif
//media.rs-online.com/t_line/LD264611-02.gif
//media.rs-online.com/t_line/LI264611-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series CJ1
Action Single
Rods Single
Bore 4mm
Stroke 5mm
Piston Speed 50 → 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Not Cushioned
Port Connection U4
Dimensions 5 (Dia.) x 40mm
Weight 3.7g
Minimum Piston Speed 50mm/s
Length 40mm
Maximum Piston Speed 500mm/s
Maximum Operating Temperature +70°C
Diameter 5mm
Minimum Operating Temperature -10°C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
26 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
18,29
(excl. BTW)
22,13
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 18,29
5 - 9
€ 17,72
10 +
€ 17,16
Related Products
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...
Miniature pin cylinders for panel mount. All cylinders ...
Description:
Miniature pin cylinders for panel mount. All cylinders are single acting with spring return. Lubrication not requiredThreaded rod-end styleNon-cushionedProof pressure 10.5 barOperating pressure 2 bar, 6mm dia and 1.5 bar, 10mm/15mm dia (min) 7 bar (max)Ambient and fluid temperature 5°C ...
Miniature free mount cylinder. Miniature BodyFree mount design ...
Description:
Miniature free mount cylinder. Miniature BodyFree mount design allows installation from 4 directionsConcentrates piping and wiring on one sideEasy seal replacementShort pitch mounting is possible.
SMC NCJ2 series of miniature cylinders offer a ...
Description:
SMC NCJ2 series of miniature cylinders offer a stainless steel body and stainless steel rods. They are a compact and lightweight highly accurate pneumatic cylinder. Available in bore sizes 6, 10, 16 mm, and a wide range of stroke lengths. ...