Festo MS Series Pneumatic Regulator G 1/2 Threaded

RS-stocknr.:: 121-5680
Artikelnummer Distrelec:: 301-69-019
Fabrikantnummer:: MS6-LR-1/2-D6-AS
Fabrikant:: Festo

Festo MS Series Pneumatic Regulator G 1/2 Threaded

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 64,21

(excl. BTW)

€ 77,69

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 80,00

Op voorraad

Plus verzending 22 stuk(s) vanaf 30 maart 2026
Plus verzending 13 stuk(s) vanaf 30 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 64,21
5 - 9	€ 61,64
10 +	€ 59,07

*prijsindicatie

RS-stocknr.:: 121-5680
Artikelnummer Distrelec:: 301-69-019
Fabrikantnummer:: MS6-LR-1/2-D6-AS
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Pneumatic Regulator
	Inlet Connection Type	Threaded
	Outlet Connection Type	Threaded
	Inlet Connection Size	G 1/2
	Series	MS
	Inlet Port Gender	Female
	Maximum Operating Pressure	20 bar
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS

	Alles selecteren
	Merk Festo
	Product Type Pneumatic Regulator
	Inlet Connection Type Threaded
	Outlet Connection Type Threaded
	Inlet Connection Size G 1/2
	Series MS
	Inlet Port Gender Female
	Maximum Operating Pressure 20 bar
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS

Land van herkomst:: HU

Festo Pneumatic Regulator, Die-Cast Aluminium Housing, Size 6 - MS6-LR-1/2-D6-AS

Keep your system's pressure in check with this pneumatic regulator from Festo. When it senses the pressure is at a pre-set level, it immediately cuts off the air supply to hold things steady. Controlling the unit's a breeze thanks to the front-facing rotary knob that lets you easily adjust the setting. You can keep a close eye on the built-in analogue gauge on the front to make sure your system is ticking over as it should.

Features & Benefits

• PE filter traps contaminants to prevent dirt build-up

• Standard nominal flow rate of 6,500L/min for safe use in high-flow pneumatic systems

• Durable die-cast aluminium housing resists corrosion

• Lockable control knob helps prevent tampering

• Lubricated operation possible to minimise the risk of friction and damage caused by wear

Applications

• Water treatment facilities

• Laboratories

• Oil and gas industry

What's the setting range of this regulator?

The pressure setting range is between 0.3 and 7 bar, so you'll find this unit's the right tool for keeping your low-pressure system in line.

Is this regulator sealed?

Yes, this regulator's sealed. It comes with robust NBR rings to prevent leakage.