SMC Pneumatic Roundline Cylinder 16mm Bore, 10mm Stroke, C85 Series, Double Acting

  • RS-stocknr. 263-8865
  • Fabrikantnummer CD85N16-10-B
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: JP
Productomschrijving

SMC C85 Pneumatic Cylinders

SMC C85 cylinders conform to ISO 6432 and CETOP RP52P standards, offer 100% mounting repeatability accuracy, incorporate abrasion-resistant seals, and a replaceable piston rod seal. The cylinders are corrosion-resistant, with the barrel and piston rod manufactured from stainless steel, double-swaged anodised aluminium end caps, and offer an exceptional service life. The double-swaged end caps provide an air tight seal. The cylinders offer high dust resistance through the use of a specially-designed and unique dust seal, making SMC C85 pneumatic cylinders suitable for use in extremely dusty environments. A low friction design that incorporates elastomer cushion seals allows the the cylinders to operate at speeds up to 1500 mm/s. C85 cylinders are suppied with a piston rod locknut and nose-mounting nut; installation is made easy through the use of large spanner flats and the space-saving design.

//media.rs-online.com/t_line/L263881-01.gif
//media.rs-online.com/t_line/L263882-01.gif
//media.rs-online.com/t_line/L263883-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series C85
Action Double
Bore 16mm
Stroke 10mm
Maximum Operating Pressure 1 MPa
Cushioning Type Rubber
Dimensions 19.7 (Dia.) x 121mm
Weight 109g
Maximum Operating Temperature +60°C
Diameter 19.7mm
Length 121mm
Minimum Operating Temperature -10°C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
38,42
(excl. BTW)
46,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 38,42
5 - 9
€ 37,25
10 +
€ 36,04
Related Products
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...
Festo DSNU series round pneumatic cylinders with flexible ...
Description:
Festo DSNU series round pneumatic cylinders with flexible cushioning rings at both ends of the actuator barrel. Featuring a stainless steel piston rod within a 3 component system that provides excellent running performance and long service life. These double acting ...
The RS range of ISO 6432 cylinders give ...
Description:
The RS range of ISO 6432 cylinders give high performance and long life even when used with non-lubricated air. Available in both single acting and double acting versions, with magnetic stainless steel pistons on all models Ø12mm and above. AISI ...