SMC Pneumatic Soft Start Valve, G 1/2 Female 1 (Operating) MPa, 1.5 (Proof) MPa

  • RS-stocknr. 873-2512
  • Fabrikantnummer EAV4000-F04-5DZ-Q
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Soft Start & Dump Valve

Pneumatic start-up valves gradually increase pressure on system start-up and exhaust air rapidly when the system is shut down. Air supply and exhaust can be manually operated, and can be locked in the exhaust position.

Combined soft start and dump spring return valve
Temperature range 0°C to +60°C
Compatible with SMC modular series FRL
Maximum working pressure: 10 bar
Proof pressure rating:15 bar
Gauge port sizes from G 1/4 to G 1/2
Piston and slide material NBR
Low power consumption solenoid - 24Vdc @ 1.8W
Large CV factor

Note

When using the dump valve facility, it is recommended that a silencer is fitted to the relieving port.

Specificaties
Kenmerk Waarde
Manufacturer Series AV4000
Type Control Valve
Supply Inlet Port G 1/2 Female
Minimum Operating Pressure 0.2MPa
Supply Inlet Port Thread Gender Female
Maximum Operating Pressure 1 (Operating) MPa, 1.5 (Proof) MPa
Supply Inlet Port Thread Standard G
Supply Inlet Port Thread Size 1/2
Standards Met TUV
Body Material ADC
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
174,33
(excl. BTW)
210,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 174,33
Related Products
Quick exhaust valve enables air to be exhausted ...
Description:
Quick exhaust valve enables air to be exhausted quickly from reservoirs and cylinders. Allows higher cylinder speeds to be achievedSimple, compact design and construction, and very reliable in operation.
Miniature In-Line quick exhaust valves. Option of built-in ...
Description:
Miniature In-Line quick exhaust valves. Option of built-in silencer or facility to pipe away exhaustExhaust connection is the same tube size as the main connections.
Two non-return check valves which permit the free ...
Description:
Two non-return check valves which permit the free flow of air in one direction only, protecting the downstream side of the supply in event of an air supply failure. Manufactured from brass with nitrile rubber seals.Operating temperature : -20 to ...
Integral push in fitting connections for fast inline ...
Description:
Integral push in fitting connections for fast inline installation. These fittings are compact and lightweight with the advantage of one-touch fitting. Easily installed into your pneumatic installations. • Can be used in compressed air or vacuum lines• Suitable for use ...